Product Overview

CONNECTIONS
SANICUBIC 1 • PART N
O
089
SANICUBIC
®
1 Grinder
Example of installation. Follow local plumbing codes for actual install. Example of installation. Follow local plumbing codes for actual install.
The Sanicubic 1 is a 1 HP heavy duty simplex grinder system used to pump away wastewater from
several bathrooms and fixtures from an entire building structure. This system is able to discharge the
waste up to 36 feet vertical and/or 328 feet horizontal. It incorporates a grinder system which is ideal
for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices,
warehouses, etc). The Sanicubic 1 is designed to handle sanitary products that may have been flushed
down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
Discharges the waste through a 1–1⁄ 2” rigid pipe. A built-in non-return valve is included on the internal
discharge pipe.
Has been designed with a 1–1⁄ 2” vent connection on the top of the enclosure. All plumbing codes
require connection to a vent system. Please note that the vent system should be a two-way air vent as
air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar
devices is not permitted.
The Sanicubic 1 is IP68 rated for possible submergence which eliminates any potential water damage to
internal components. It comes equipped with an external control panel as well as a visual and audible
alarm system (15 Ft long wire).
The pump discharges wastewater from several toilets, sinks, bath/showers, urinals and even washing
machines. The wastewater from other sanitary fixtures is drained into the Sanicubic 1 via four 1–1⁄2” or
4” inlets on either side of the housing and on top of the enclosure. Note that when draining wastewater
into the pump through either of the side inlets, an external check valve (not supplied) has to be installed.
Also, note that there should be a minimum 10” height difference between the base of the Sanicubic 1
to the bottom of the shower/bathtub drain or to the base of the toilet.
INSTALLATION ABOVE GROUND
INSTALLATION BELOW THE GROUND
ASME A112.3.4
PRE-ASSEMBLED GRINDING SYSTEM
CAPABLE OF DISCHARGING
WASTEWATER FROM MULTIPLE FIXTURES
System can be installed above the floor, inside a pit or even
retrofitted into an existing sewage ejector basin (at least
24” diameter). Powerful 1 HP motor for absolute reliability
and efficiency that can handle up to 50 gallons per minute
from several fixtures.
System is capable of handling multiple fixtures
simultaneously. New grinding technology can handle
feminine hygiene products and eliminates clogging issues
common with sewage ejector stations.
CONNECTIONS
APPLICATIONS
RESIDENTIAL
PUMPING DISTANCE
36 Ft
328 Ft
SINK
WASHING
MACHINE
BATHTUB
DISHWASHER
TOILET
LAUNDRY
SINK
SHOWER
BAR SINK
Scan with your smart phone to watch a clip of the
Sanicubic 1 system
52