Specifications

1
Guide to Using this Manual
Pictograms
Equipment and features
Engineering improvements
Symbols in text
All the pictograms attached to the machine are shown and explained in this manual.
ln addition to the operating instructions,this manual may contain paragraphs that require your special attenti-
on.Such paragraphs are marked with the symbols described below:
This instruction manual refers to several models with different features. Components that are not installed in
all models and related applications are marked thus. Such components are available as special accessories
from your dealer.
P
h
ilosophy is to continually improve all of its products. As a result, engineering changes and Tmprovements
are made from time to time. If the operating chatacteristics or the appearance of your machine differ from
those described in this manual, please contact your dealer for assistance.
Therefore, we cannot be responsible for changes, modifications or improvements not covered in this manual.
Warning where there is a risk of an accident or personal injury or serious damage to property.
W
arning where there is a risk of damaging the machine or individual components.
N
ote or hint which is not essential for using the machine, but may improve the opetator's umderstanding
of the situation and result in better use of the machine.
Note or hint on correct procedure in order to avoid damage to the environment.
The operating and handling instructinns are supported by illustrations.
The individual steps or procedures described in the manual may be marked in different ways:
Step or procedure without direct reference to an illustration.
Description of step or procedure that refers directly to the illustration and contains item numbers that appear
in the illustration.
Example:
Loosen the screw (1)
Lever (2) ...
Safety Precautions
Special safety precautions must be observed when working with the power tool.
It is important that you read, fully understand and observe the following safety preca-
utions and warnings.