Specifications

6
Turn the control handle counterclockwise to the horizontal position.
Now rotate the extension rube counterclockwise until the metering unit points in the same direc-
tion as the control handle.
Tighten down clamp screw (see "Adjusting the control handle").
A
ttach liquid hose to the pleated hose with the retainer .
Pu
sh the extension tube into the pleated hose as far as it will go.
Rotate the tube to the left (counter-clockwise) as far as stop and leave it in that position until you have
completed the following adjustments.
Mounting the spraying attachment
Push the free end of the liquid hose over the stub on the stop cock and secure in position with
the hose clip .
Put the unit on your back.
Pull the ends of the straps downward to tighten the harness.
Release the clamp screw .
Slide the control handle along the pleated hose to the
most comfortable position.
Retinhten the clamp screw .
Close the stop cock (move lever to vertical position).
Fill up with water and check all hose connections for leaks.
Adjusting the control handle
Adjusting the harness straps