User's Manual

Step 1: Attach the Cross Tubes to the Front Frame

Position the Front Frame (A) as shown in Diagram 1; then, thread each Decorative Face Bolt (K) through the Front Frame,

a Three Hole Plate (C) and into a Steel Cross Tube (B).

Repeat this process until all twelve Steel Cross Tubes (B) are fastened to the Front Frame (A) as shown in Diagram 1.

Firmly hand tighten each Steel Cross Tube (B).

Allen Bolt - I

Qty. 12

Washer - J

Qty. 4

Decorative Face Bolt - K

Qty. 12

Allen Key - M

Qty. 1

Glass Protector - L

Qty. 8

Diagram 1