VLT16 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! 1 Does your TV weigh more than 125 lb (56 kg) including accessories? 125 lb (56 kg) 2 3 No — Perfect! Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
Features Brackets adjust side to side within the wall plate for optimal positioning TV brackets designed to fit TV hole patterns from 200 x 200 mm up to 750 x 400 mm TV tilts for the perfect viewing angle Level adjustments create a worry-free installation Kick stands hold TV from wall to create room to attach cables Adjustment knobs allow fingertip control or to restrict movement 3
Dimensions in. [mm] 29.28 743.8 27.00 685.8 UP TO 29.53 750.0 2.00 50.8 LEVEL ADJUST 2° 17.25 438.1 3.31 84.0 4 12.00 304.8 15.75 400.
10° in. [mm] 0.99 25.1 0.99 25.
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Adjustments STEP 2 Parts and Hardware Allen Key Wall Plate M3 18 x1 14 x1 Washers Lag Bolts 15 x3 5⁄16 in. x 2 3⁄4 in. Concrete Anchors 16 x3 5/16 in. 5/16 17in.
STEP 1 Attach Brackets to TV 1-1 Select TV Screw Diameter 1-2 Select TV Screw Length Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use. If your TV has a flat back, use the shorter screws.
1-3 Attach TV Brackets Center the TV brackets 01 and 02 over your TV hole pattern as shown - making sure the brackets are level. Install using either the short screw and washer or spacer, long screw and washer combination you selected for your TV.
STEP 2 Attach Wall Plate - Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● ● ● Drywall covering the wall must not exceed 16 mm (5/8 in.) Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.) Minimum horizontal space between fasteners: 406 mm (16 in.) 1. Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder.
3. Remove the wall plate 14 and drill pilot holes. IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit. 4. Install wall plate 14 using lag bolts 15 and washers 17 . Tighten the lag bolts only until the washers are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts. 3 4 75 mm (3 in.) 5.
STEP 2 Attach Wall Plate - Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! ● ● ● ● Mount the wall plate directly onto the concrete surface Minimum solid concrete thickness: 203 mm (8 in.) Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.) Minimum horizontal space between fasteners: 203 mm (8 in.) 1. Level the wall plate 14 and mark three hole locations. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.
3. Insert concrete anchors 16 . CAUTION: Be sure the anchors are seated flush with the concrete surface. 4. Install the wall plate 14 using three lag bolts 15 and washers 17 . Tighten all lag bolts only until the washers are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. 1. Hook the TV brackets 01 and 02 onto the wall plate 14 . 2. Rest the TV into place against the wall. 3. The brackets click and lock the TV in place.
Manage Cables 1. Pull down and hold both release cords while gently pulling the bottom of the TV away from the wall until the kick stands fall into place. CAUTION: To prevent breaking the locking latch: always pull and hold the release cords down while pulling the TV away from the wall. 2. Temporarily rest the TV on the kick stands while assembling the cables on the TV. CAUTION: TV is not secured to the wall when it is in the kick stand position. Assistance is recommended for this step. 3.
TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. To level your TV, turn the level adjustment screw on the top of either bracket using hex key 18 to raise or lower that respective side of the TV. If your TV is too loose or too tight, adjust the tension knobs using hex key 18 . NOTE: Once your TV is in place, tighten the tension knobs to prevent unwanted movement.
TV LATERAL SHIFT REMOVING THE TV Slide the TV left or right along the wall plate 14 to reposition. To remove your TV from the wall plate 14 . Disconnect all cables and then follow the procedures on PAGE 15 to pull the release cords and pull bottom of TV from wall, then lift TV off the wall plate to remove. To reattach, follow the procedures in STEP 3 on PAGE 14.
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea perfecto para usted. 1 ¿Su televisor pesa más de 56 kg (125 lb), incluidos los accesorios? No — ¡Perfecto! (56 kg) 125 libras Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.
ESPAÑOL Descripción VER PÁGINA 3 Placas de sujeción diseñadas para adecuarse a televisores con patrones de orificios de 200 x 200 mm hasta 750 x 400 mm. Las placas de sujeción se mueven de lado a lado dentro de la placa mural para un posicionamiento óptimo. Los pies de apoyo mantienen al televisor separado de la pared para crear espacio para adjuntar cables. El televisor se inclina para lograr el ángulo de visualización perfecto. Los ajustes del nivel crean una instalación sencilla.
ESPAÑOL PASO 1 Colocar las placas de sujeción en el televisor 1-1 Seleccione el diámetro de los tornillos para el televisor VER PÁGINA 8 Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M4, M6 o M8) utilizar. 1-2 Seleccione la longitud de los tornillos para el televisor VER PÁGINA 8 Si el dorso del televisor es plano, utilice los tornillos cortos.
ESPAÑOL PASO 2 Fijar la placa mural - Opción para montantes de madera (continuación) 1. 2. Localice los montantes. Verifique el centro de los montantes con un punzón o un clavo delgado, o bien utilice un detector de bordes de montantes. Nivele la placa mural 14 y marque la ubicación de los orificios en el centro de los montantes. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. 3.
ESPAÑOL PASO 2 Fijar la placa mural - Opción para hormigón sólido o bloques de cemento (continuación) 2. Retire la placa mural 14 y realice los orificios guía en el hormigón. Nunca perfore el cemento que une los bloques. IMPORTANTE: Los orificios guía deben realizarse con una mecha de 10 mm (3/8'') de diámetro hasta una profundidad de 75 mm (3''). 3. Introduzca los anclajes para cemento 16 . PRECAUCIÓN: Cerciórese de que los anclajes queden nivelados respecto de la superficie de hormigón. 4.
ESPAÑOL Organizar los cables 1. 2. 3. 4. VER PÁGINA 15 Jale hacia abajo y sostenga ambos cordones de desenganche mientras tira con cuidado de la parte inferior del televisor para separarlo de la pared hasta que los pies de apoyo se ubiquen en su lugar. PRECAUCIÓN: Para que el pasador de seguridad no se rompa, siempre jale y sostenga los cordones de desenganche mientras retira el televisor de la pared. Apoye temporalmente el televisor sobre los pies de apoyo mientras instala los cables en el televisor.
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.
