UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page i INSTRUCTION MANUAL CLT-D5880 CLT-D5882 CLT-D5883 5.8-GHz Cordless Telephone with Caller ID & Visual Call Waiting IMPORTANT Charge the handset battery pack for a full 15-20 hours before using your cordless handset for the first time. SANYO Canada Inc. www.sanyo.
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page ii Introduction Congratulations on your purchase of the CLT-D5880/CLT-D5882/CLT-D5883 cordless telephone from SANYO. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 5.8 GHz technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features ● 5.
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 1 CONTENTS Introduction...................inside front cover Features .........................inside front cover Controls and Functions...........................E2 GETTING STARTED Checking the Package Contents...........E4 Setting Up the Phone..............................E4 Mounting the Base Unit On a Wall.......E9 USING THE INTERFACE Display and Icons ..................................E11 Soft Key Function ..................................
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 2 Controls and Functions 1 5 6 13 2 7 3 8 END TALK 9 FLASH VOL 4 10 11 12 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9WXYZ TONE 0OPER SPEAKER INTCM /HOLD 14 15 16 17 18 19 20 1. Handset Antenna 11. SPEAKER 2. Beltclip Hole 12. INTCM (intercom) /HOLD 3. Speakerphone Speaker and Ringer 13. Headset Jack Cover 4. Handset Battery Compartment 15. END 5. New Message LED 16. CID (Caller ID) 6. Handset Earpiece 17. #/ 7.
UP800DH(CLT-D5880) OM 1/24/06 3:37 PM Page 3 22 23 21 24 25 21. Base Charging Contacts 24. PAGE 22. Base Antenna 25. DC IN 9V Jack 23. Base CHARGE LED 26. TEL LINE Jack 26 29 27 28 For multi-handset packs only 27. Charging Contacts 28. Charger CHARGE LED 29.
UP800DH(CLT-D5880) OM 1/24/06 GETTING 3:37 PM Page 4 STARTED Checking the Package Contents Make sure you have received the following items in the package.
UP800DH(CLT-D5880) OM GETTING 1/24/06 3:37 PM Page 5 STARTED B. Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit or charging cradle. IMPORTANT Use only the SANYO rechargeable battery pack supplied with your cordless telephone.
UP800DH(CLT-D5880) OM 1/24/06 GETTING 3:37 PM Page 6 STARTED Low Battery Alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, ¨Low Battery¨ appears on the LCD and none of the keys will operate. If the phone is in use, ¨Low Battery¨ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.
UP800DH(CLT-D5880) OM GETTING 1/24/06 3:38 PM Page 7 STARTED C. Connect the base unit and charge the handset 1 2 3 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. Set the base on a desk or tabletop. Place the handset in the base unit for 15-20 hours without interruption. The base unit’s LED light (labeled CHARGE) illuminates once the handset is placed in the base. The LED light will illuminate whether the battery pack is connected or not.
UP800DH(CLT-D5880) OM 1/24/06 GETTING 4 3:38 PM Page 8 STARTED Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. To telephone line outlet To TEL LINE Telephone line cord (supplied) Tip: If your telephone outlet isn't modular, contact your telephone company for assistance. Modular Connecting the Charger (for CLT-D5882/CLT-D5883) 1 2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.
UP800DH(CLT-D5880) OM GETTING 1/24/06 3:38 PM Page 9 STARTED Mounting the Base Unit On a Wall Standard Wall Plate Mounting This phone can be mounted on any standard wall plate. 1 2 3 4 5 6 7 Put the AC adapter and the telephone line cord through the hole on the wall mount adapter. Plug the AC adapter into the DC IN 9V jack. Plug the telephone line cord into the TEL LINE jack. Slide the wall mount adapter into the notches on the base. Plug the AC adapter into a standard 120V AC wall outlet.
UP800DH(CLT-D5880) OM 1/24/06 GETTING 3:38 PM Page 10 STARTED Direct Wall Mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cable lengths.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 11 THE INTERFACE Display and Icons Example of the standby mode display SUN 12:00A Handset #1 New CID: 5 REDIAL MENU Icon Ringer off icon (when the ringer is off) / day of the week and time / battery icon Handset ID Number of new Caller ID calls received (If there are no new Caller ID messages, the Handset ID appears here.) Appears During Description Standby/Talk Battery icons indicate the handset battery status.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 12 THE INTERFACE Animation Displays The handsets have a variety of animation displays. Below are examples of the animation screens and what they mean: Turning on the phone Hanging up the phone Welcome! 1:53 End Please Wait...
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 13 THE INTERFACE Soft Key Function "Soft" keys are keys that change function during the operation of the phone. There are three soft keys on each handset.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 14 THE INTERFACE Main Menu Options Your phone has five main menu options: Walkie-Talkie Mode, Room/Baby Monitor, Handset Setup, Global Setup and Deregister HS. Default Settings The default settings set from the factory match the features that most people use. You may not need to change them. However, there are a number of options you must set and entries you must make in memory to take full advantage of all the phone features.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 15 THE INTERFACE Setting Menu Options Below are some tips for using the software interface on your phone. • Press the MENU soft key to access the main menu. • Use VOL/▲ and VOL/▼ to scroll through options. • Press the OK soft key to make a selection. • Press the BACK soft key to return to the previous screen. DirectLink Mode Room Monitor Handset Setup BACK OK BACK • Press END to exit the menu.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 16 THE INTERFACE Room/Baby Monitor This feature allows you to monitor sounds in another room. Place a handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room. Using Room/Baby Monitor 1 2 3 Press the MENU soft key and select the Room Monitor menu. To Room Monitor appears.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 17 THE INTERFACE Handset Setup The following submenu options must be set separately for each handset. Programming your Voice Mail Access Number 1 2 3 Press the MENU soft key. Select the Handset Setup menu, and then the Edit Voice Mail submenu. Edit V_mail No. appears. Edit V_mail No.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 18 THE INTERFACE Distinctive Ringer Setup Distinctive Ringer allows you to assign a designated ring tone to a stored phonebook number (100 stored locations available). When a call is received and the Caller ID information matches the information in one of the phonebook memory locations, the phone uses the distinctive ring assigned to that particular caller. You can assign distinctive rings to multiple phonebook memory locations.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 19 THE INTERFACE Setting the True Banner True Banner lets you customize the name your handset displays. The name will be displayed on the LCD screen during standby mode, Intercom, Intercom Hold, Room Monitor and Copy Phonebook operation. The banner name will be displayed on the receiving handset as well. 1 2 3 Press the MENU soft key. Select the Handset Setup menu, and then the Banner submenu.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 20 THE INTERFACE Setting the Key Touch Tone Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off. 1 2 3 Press the MENU soft key. Select the Handset Setup menu and then the Key Touch Tone submenu. Press VOL/▲ or VOL/▼ to select On or Off. Key Touch Tone On Off BACK DELETE OK Press the OK soft key. You will hear a confirmation tone.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 21 THE INTERFACE Global Setup If you change one of the global settings, you change that setting for all registered handsets. Only one handset can change global settings at a time. Setting Day and Time Day & Time sets the day and time of your display. 1 2 3 4 5 Press the MENU soft key. Select the Global Setup menu, and then the Day & Time submenu option.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 22 THE INTERFACE Setting the Area Code If you enter a 3-digit area code number in the "Area Code" option, your local area code does not appear in the Caller ID message. For calls received from outside your local area code, you will see a full 10-digit number. 1 2 3 Press the MENU soft key. Select the Global Setup menu, and then the Area Code submenu. Area Code __ BACK DELETE OK Press the number keypad (0-9) to enter a 3-digit area code.
UP800DH(CLT-D5880) OM USING 1/24/06 3:38 PM Page 23 THE INTERFACE Setting Voice Mail Tone Voice Mail Tone sets the voice mail tone. If your service does not support SDT message signal, set your VMWI (Visual Message Waiting Indicator) not to detect SDT message signal. 1 2 3 Press MENU soft key. Select the Global Setup menu, and then the Voice Mail Tone Submenu. Press VOL/▲ or VOL/▼ to set the voice message indication (SDT message signal) to On or Off.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 24 BASICS Making and Receiving Calls With the handset's duplex speakerphone, you can have hands-free conversations. The icon appears on the display screen during hands-free conversations. You can easily switch a call from normal conversation to hands-free conversation. To switch a call, press SPEAKER during the call.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 25 BASICS From the Handset Normal Conversation To answer a call To make a call To hang up Hands-free Conversation Handset On the Cradle Pick up the handset (Automatic Talk is: on) or pick up the handset and press TALK/FLASH (Automatic Talk is: off). Handset Off the Cradle Press any number key, /TONE/ , or #/ (When Anykey Answer is on), or press TALK/FLASH. Handset Off the Cradle Press SPEAKER. Handset Off the Cradle 1) Press TALK/FLASH.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 26 BASICS Call Waiting If you have Call Waiting service and a call waiting tone sounds while you are on a call, press TALK/FLASH on the handset to accept the waiting call. There is a short pause, and then you will hear the new caller. To return to the original caller, press TALK/FLASH again.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 27 BASICS Redialing a Call The last three phone numbers dialed can be quickly redialed from the handset. Redial numbers stored in the handset are independent from each other. 1 With the phone in standby mode, press the REDIAL soft key. 8007303456 BACK 2 3 4 DELETE STORE VOL/▲ or VOL/ ▼ Press VOL/▲ or VOL/▼ to scroll through the last three dialed numbers. 2145452930 BACK Press TALK/FLASH or SPEAKER on the handset.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 28 BASICS Adjusting the Ringer, and Earpiece and Speaker Volume Ringer Volume END TALK In standby mode, press the volume up key or volume down key on the handset to select one of three ringer volumes (Off, Low, or High). FLASH VOL CID 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO Earpiece and Speaker Volume You can select from among six volume levels on the handset.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 29 BASICS Tone Dialing Switch-over If your telephone company requires pulse dialing, you can switch-over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 30 BASICS Using One Touch Voice Mail Access If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox. Just program the handset with your access number, and you can get your messages at the touch of a button on the handset. (The voice mail service provider will supply you with the access number. This number may be simply a phone number.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 31 DIRECTORY Phonebook (Storing Phone Numbers, Names, Distinctive Rings and Speed Dial) You can store names and numbers in your phone's phonebook, search for names alphabetically, and dial phonebook entries with just a few key presses. You can store up to 100 numbers in each registered handset. The phone uses the same memory locations to store phonebook entries and Caller ID messages. Empty phonebook locations are used to store Caller ID messages.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 32 DIRECTORY 6 Distinctive Ring appears. Press VOL/▲ or VOL/▼ to move the pointer to one of the Distinctive Ring options and then press the OK soft key. 7 Speed Dial appears. Press VOL/▲ or VOL/▼ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). 8 Press the OK soft key. You will hear a confirmation tone, and Done! appears in the display.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 33 DIRECTORY Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a number key (0-9), the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key. Number of times key is pressed keys 1 1 A D G J M P T W & .
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 34 DIRECTORY For example, to enter Movies: 1 2 3 4 5 6 7 8 When the phone is in standby mode, press Store/Edit Name appears. Press 6 once, and then press #/ and the STORE soft key. to move the cursor to the right. Press 6 six times. Press 8 six times. Press 4 six times. Press 3 five times. Press 7 eight times. When finished, press the OK soft key.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 35 DIRECTORY Viewing the Phonebook Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. 1 Press . If you recall the phonebook during a call, the COPY and STORE soft key will not appear. Phonebook :100 Search [A-Z/ / ] Store [STORE] BACK 2 COPY STORE Press VOL/▲ or VOL/▼, or the number keypad to scroll through the phonebook locations.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 36 DIRECTORY Making Calls Using the Phonebook From Standby Mode 1 2 3 When the phone is in standby mode, select the phonebook location to dial (see "Viewing the Phonebook" on page E35). Movies 800-730-3456 Beethoven9/SPD1 BACK DELETE EDIT Press TALK/FLASH or SPEAKER on the handset. The displayed number is dialed. To hang up press END. From Talk Mode 1 2 3 4 Press TALK/FLASH or SPEAKER.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 37 DIRECTORY Editing or Erasing a Stored Name, Phone Number, Distinctive Ring and Speed Dial 1 2 When the phone is in standby mode, press . Press VOL/▲, VOL/▼, or the number keypad to select the phonebook locations (see "Viewing the Phonebook" on page E35). Phonebook :100 Search [A-Z/ / ] Store [STORE] BACK COPY STORE a. Editing the Stored Data 1 2 3 When the phonebook location to be edited appears, press the EDIT soft key. Store/Edit Name appears.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 38 DIRECTORY Copying Phonebook Locations (CLT-D5882/CLT-D5883) If you have two handsets, Copy Phonebook allows you to transfer stored phonebook locations from handset to handset so you don't have to manually re-enter names and numbers. You can transfer one memory (phonebook location) at a time, or all memory locations at once. 1 2 3 4 When the phone is in standby mode, press . Press the COPY soft key.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 39 FEATURES Caller ID and CIDCW (Caller ID on Call Waiting) You must subscribe to Caller ID services through your local telephone provider to use these features. When the telephone rings, the Caller ID feature allows you to view the caller's name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting), you will hear a call waiting tone while you are on a call, and the Caller ID data is displayed.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 40 FEATURES Notes: • If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller's phone number and name does not appear. (This includes some international calls.) • When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 41 FEATURES Viewing the Caller ID List You can view the Caller ID list through the handset during a call or when the phone is in standby mode. 1 2 Press CID. The summary screen appears. The screen shows the number of new messages and total messages.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 42 FEATURES Deleting a Caller ID Message Deleting Information from the Caller ID List 1 2 3 4 When the phone is in standby mode, view the Caller ID information to be deleted (see "Viewing the Caller ID List" on page E41). Delete Caller ID Yes No BACK OK BACK Press the DELETE soft key. Delete Caller ID appears. Press VOL/▲ or VOL/▼ to choose Yes. Press the OK soft key. You will hear a confirmation tone.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 43 FEATURES Using the Caller ID Message List Calling a party from the Caller ID list Standby Mode 1 2 3 When the phone is in standby mode, select the Caller ID message (see "Viewing the Caller ID List" on page E41). 12/21 12:30PM Jane Smith 214-555-1234 BACK DELETE STORE To have the phone dial a "1" before the displayed Caller ID number, press /TONE/ .
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 44 FEATURES Notes: • When a long distance call has been set, "1" appears in the display. • If the Caller ID message was received as a private/unknown number, or the message does not have the number, you cannot store the message in the Phonebook. If it was received as private/unknown name, the message will be stored as . • Even if the 100 memory locations are full, the message will be stored in the Phonebook.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID 3:39 PM Page 45 FEATURES Call Waiting Deluxe Features Your phone gives you new options for call waiting. At the touch of a button, you can place the caller on hold, send them to your voice mail service, or conference them into your current call. You must subscribe to Call Waiting and Call Waiting Deluxe to use these features. Not all features are available in all areas. Check with your local telephone company for details.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM MULTI-HANDSET Page 46 FEATURES The features in this section require a minimum of two handsets to operate. Using the Walkie-Talkie Mode To use this feature, you must enter the handsets into Walkie-Talkie mode first. To enter Walkie-Talkie mode, see page E15. Walkie-Talkie call 1 2 3 4 When the phone is in the Walkie-Talkie standby mode, press the DirectLink soft key (example of Walkie-Talkie from handset #1).
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM MULTI-HANDSET Page 47 FEATURES 3-Way Conferencing The phone permits 3-way conversations between 2 handsets and an outside line. 1 2 3 4 Initiate the call normally. Once the call is in progress, other people can join the call. To join a conference call, press TALK/FLASH or SPEAKER on the other handset. To leave a conference call, simply hang up as you normally would. All other parties will remain connected.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM MULTI-HANDSET Page 48 FEATURES Call Transfer Feature 1 2 3 4 During a call, press INTCM/HOLD on the handset. Select a handset to transfer the call to within Hold,to transfer Handset #2 10 seconds. Handset #3 To select the handset, press VOL/▲ or VOL/▼, BACK D E L E T E OK and then press the OK soft key. If you select All, all other handsets will be paged. The call will automatically be placed on hold, and an intercom tone sounds.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL 3:39 PM Page 49 INFORMATION Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: 1 In standby mode, select Deregister HS in the menu and press the OK soft key.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL 3:39 PM Page 50 INFORMATION Installing the Beltclip To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull either side of the beltclip to release the tabs from the holes. Optional Headset Your phone can be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.
UP800DH(CLT-D5880) OM 1/25/06 ADDITIONAL 7:12 PM Page 51 INFORMATION Note on Power Sources Battery Replacement and Handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the SANYO battery model and SANYO adapter model specifically designated for this product.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL 3:39 PM Page 52 INFORMATION Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom The CHARGE LED won't illuminate when the handset is placed in the cradle. • Make sure the AC adapter is plugged into the base or the charger (if you have more than one handset) and wall outlet. • Make sure the handset is properly seated in the cradle. • Make sure the charging contacts on the handset are clean.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL Symptom Severe noise interference. 3:39 PM Page 53 INFORMATION Suggestion • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. • The handset was picked up before the second ring. The Caller ID does not display. • The call was placed through a switchboard.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL 3:39 PM Page 54 INFORMATION Technical Information IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 55 THE SANYO COMFORT WARRANTY WARRANTY APPLICATION SANYO Communications products purchased new, unused in Canada through a SANYO Authorized Dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR covering parts and labour, from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. SANYO CANADA INC.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 56 SOS HELP LINE At SANYO, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of SANYO telephone products.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 57 Main Menu Flow Chart SUN 12:00A Handset #1 New CID: 5 REDIAL MENU MENU DirectLink Mode Room Monitor Handset Setup BACK BACK BACK To enter DirectLink mode press [ENTER] BACK OK DirectLink Mode Room Monitor Handset Setup BACK OK OK OK BACK BACK OK OK BACK BACK OK OK BACK BACK OK OK BACK BACK or or or OK Deregister HS? Yes No BACK DirectLink OK Day & Time CIDCW Area Code Dial Mode Voice Mail Tone BACK Handset Setup
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 58 May be covered under one or more of the following U.S.