User manual

English
Preparation 12
System Information
Press the button to display the current initial settings information for this unit. These
settings change when communication line settings have been changed in System Setup.
1 Status of selected equipment
(UNDER SELECTION)
• Present camera (00001)
Currently selected camera channel
• Camera address (00001)
Currently selected camera address
• Monitor/Unit (00001)
Currently selected video equipment (DVR/
MUX) address
• A/B/V line (V)
Currently selected line (displayed line sends
command to camera)
2 Communication status for
video equipment or camera
(TELEMETRY)
Displays the communication settings set in
“2–TELEMETRY”. (P45)
3 Communication status for
video equipment (VIDEO)
Displays the communication settings set in
“1–VIDEO” and the address for this unit. (P44)
• Address for this unit (Keyboard Add): 00001
(P44)
4 Returns to Main Menu.
5 Displays system installer
information.
esc
i
SERVICE
GENERAL INFORMATION
UNDER SELECTION
Present camera.......: 00001
Camera address.......: 00001
Monitor/Unit.........: 00001
A/B/V line...........: V
TELEMETRY
Connector.........(A): Video
Protocol..........(A): SANYO SSP
Baudrate..........(A): -----
Connector.........(B): Telemetry
Protocol..........(B): ----------
Baudrate..........(B): -----
VIDEO
Type.................: DVR/MUX
Protocol.............: SANYO DVR/MU
Baudrate.............: 19200
Keyboard address.....: 00001
Firmware version.....:
CAM 1 DVR 1
ALARM
PLAY
R PLAY
RECALARM
PLAY STOP
PLAY
SPEED
REC STOP
SYSTEM
SETUP
MAP
ENTER
PLAY
SPEED
ADDRESS ?
DVR
STILL
TIMER
ON/OFF
CLOCK
ADJUST
4
1
3
2
5
esc
2-TELEMETRY
2-TELEMETRY
>A-Connector Video
A-Protocol SANYO SSP
A-Baudrate -----
B-Connector Telemetry
B-Protocol ----------
B-Baudrate -----
COMMUNICATIONS
esc
1-VIDEO
1-VIDEO
>Type : DVR/MUX
Protocol : SANYO DVR/MU
Baudrate : 19200
Keyboard Add: 00001
COMMUNICATIONS