User manual

English
System Setup 44
Communication Setup
b
bb
b Unit Address Setup
When purchased, the unit address is set to
“1”. Change the address when using multiple
controllers.
Allocate addresses from 0 to 4.
* The addresses can also be checked using
the button.
Changing the Unit Address
1
Press the button to select
“Keyboard Add”, then press
the button.
The address setup screen appears, and
Datum “00000” will flash.
2
Press a number button
(example: 3), then press the
button.
The communication setup screen
appears, and the address displays as 3.
Entry range: 0, 1, 2, 3, 4
Note: When 5 or a higher number is entered,
a warning sounds and “Digit address”
displays “Datum not enabled”. Enter a
number within the input range.
: Returns to Communication Setup
screen.
: Restores the input number to “0”.
ent
esc
1-VIDEO
1-VIDEO
Type : DVR/MUX
Protocol : SANYO DVR/MU
Baudrate : 19200
>Keyboard Add: 00001
COMMUNICATIONS
COMMUNICATIONS
enter
esc
ent
esc
del
enter
123
456
78
.
0
9
Datum: 00000
00000
00001
Accept.values
Max 00004
00004
Min 00000
00000
Digit
address
enter
esc
ent
esc
del
enter
123
456
78
.
0
9
Datum: 00003
00003
00001
Accept.values
Max 00004
00004
Min 00000
00000
Digit
address
ent
esc
1-VIDEO
1-VIDEO
Type : DVR/MUX
Protocol : SANYO DVR/MU
Baudrate : 19200
>Keyboard Add: 00003
COMMUNICATIONS
COMMUNICATIONS
esc
del