User manual

English
System Setup 54
Setup (CONFIGURATION)
• 4–Matrix alarm: Matrix alarm
detection
This setting sounds a buzzer when an
alarm is detected.
Selections: YES, NO
• 5–Power saving: Power save
function
When no buttons are operated for
approximately one minute, the screen
brightness is automatically switched
(dimmed).
When another button operation is
performed, the brightness returns to
normal.
Selections: YES, NO
3
Press the button.
The selection item stops flashing, and the
setup is complete.
b
bb
b Joystick Setup (JOYSTICK)
1
Press the button or
button to select “JOYSTICK”,
then press the button.
The “3–JOYSTICK” screen is displayed.
2
Press the button or
button to switch the joystick
setting position.
Setting positions:
Set in sequence, from number 1.
Each joystick position will be placed in
memory.
• 1–Released (Setting center position)
Press the button without
touching the joystick.
• 2–All at right
(Setting far right position)
Press the button with the joystick
tipped to the far right.
• 3–All at left (Setting far left position)
Press the button with the joystick
tipped to the far left.
• 4–All up (Setting topmost position)
Press the button with the joystick
tipped to the topmost position.
• 5–All down
(Setting bottommost position)
Press the button with the joystick
tipped to the bottommost position.
• 6–Rotate zoom at left
(Setting left zoom position)
Press the button with the joystick
rotated to the far left.
• 7–Rotate zoom at right
(Setting right zoom position)
Press the button with the joystick
rotated to the far right.
ent
ent
ent
esc
3-JOYSTICK
3-JOYSTICK
>1-Released
2-All at right
3-All at left
4-All up
5-All down
6-Rotate zoom at left
7-Rotate zoom at right
Max Cent. Min. D+ D-
Max Cent. Min. D+ D-
X:
X:
00620 00500 00400 007 007
Y:
Y:
00620 00500 00400 007 007
Z:
Z:
00620 00500 00400 007 007
X:
X:
007 Y:
Y:
007 Z:
Z:
007
CONFIGURATION
CONFIGURATION
When the wrong position was set
by mistake, move the cursor to the
mistaken setting and set it again.
ent
ent
ent
ent
ent
ent
ent