Instructions / Assembly

5
homacer
Step- 8
6
Please follow the diagram above on how the hex bolt,
washers and nut should be installed on the door and
hangers. Do not install them any other way since it may
interfere with the funcion of the sliding system.
''
3 1/2''
Drill the holes for the hanger according to the dimension
given in the picture. The distance between the top edge
of the door and the center of the upper hole is 1 5/8”. The
distance between the side edge of the door and the hanger
is up to your choice. Typically around 2”to 4”. Next, install the
hex bolts and acorn nuts as shown in the picture.
Notice: If you have other
design hanger please
look up the dimension
on Page 3.