Quick Start Guide

Zzz
The keyboard will go into sleep mode after ~30
minutes of inactivity.
Press any key to wake up.
6
The power indicator light will flash green when
battery is low. Plug in charging cable into
keyboard’s USB-C port and connect to a powered
USB port. Allow 2-3 hours for a full charge or until
red LED light turns o.
5
To toggle between connected Bluetooth devices,
press Bluetooth 1, 2, or 3 button. To remove saved
Bluetooth device, press Fn + Shift (left) + Delete.
4
On the host device, look for “Satechi Bluetooth
Keyboard” and connect to pair.
The blue LED light will stop blinking, indicating a
successful pairing.
3
3s
2-3h
To assign a Bluetooth device, press and hold one
of the keyboard’s Bluetooth buttons for ~3 seconds
until blue LED light is flashing.
You can assign up to
3 Bluetooth devices.
2
Turn on your Wireless Keyboard.
The power indicator light should turn green for ~3
seconds, then turn o.
1
NOTE: USE INCLUDED USB-C CABLE TO FULLY CHARGE YOUR KEYBOARD BEFORE FIRST USE
WIRELESS KEYBOARD
INSTRUCTIONAL GUIDE