User`s manual

3. Channel Search
User's ManualUser's Manual
6 7
! Press Up/Down keys to highlight the Installation item in main menu
and press OK key.
! This menu consists of one sub-menus as Dish Setup.
3.1 Dish Setup
! Under the “Dish Setup” menu, you can edit satellite data and LNB
information.
! Press Left/Right key to move left side or right.side
! Press Red key to add new.satellite or transponder
! Press Green key to edit satellite or transponder
! Press Yellow key to delete satellite or transponder
! Press Blue key to start scan satellite channel
! Press POS key to switch display satellite list or transponder list
! Satellite list: Select the satellite which you need to be searched.
! Transponder list: Select the transponder which you need to be
searched
! Transponder: Switch among all the transponders carried on the satellite shown in the first item.
! LNB Type: Select the frequency value and single or dual frequency of your LNB. This is based on
your real LNB device type.
! LNB Power: Select the LNB Power to Off, 13/18V, 13V or 18V.
! Switches (22K, Toneburst, DiSEqC1.0, DiSEqC1.1): To configure the antenna with those
switches.
! Switches Motor mode: Select the motor mode to None, DiSEqC1.2 and DiSEqC1.3. if select
DiSEqC1.2, press Red key to set limit, and if select DiSEqC1.3, Red key to set limit and Green key
to set location
3.1.1 Motor Edit
If you connect a DiSEqC1.2 motor, then select the Motor type to DiSEqC1.2 or DiSEqC1.3, and press
OK key, the following items will be displayed.
! Move Auto: press Left/Right keys to move your antenna east or west. If signal locked, motor will
stop automatic.
! Move Continue: press Left/Right keys to move your antenna east or west. Motor will continue
move and stoped if motor limit or move to motor edge
! Move Step: press Left/Right keys to move your antenna one step to east or west. Motor will stoped
if limit or goto motor edge
! Store Position: Press OK key to save the current position.
! Goto Position: Press Left/Right key to move motor to stored position.
! Goto Reference: Press OK key to move the motor to the reference position.
! GotoX: Press Left/Right key to move motor to stored position.
3.1.2 Set Limit
If you connect a DiSEqC1.2 motor, then select the Motor type to DiSEqC1.2 or DiSEqC1.3, and press
Red key, the following items will be displayed.
! Move Continue: press Left/Right keys to move your antenna east or
west. Motor will continue move and stoped if motor limit or move to
motor edge.
! Move Step: press Left/Right keys to move your antenna one step to
east or west. Motor will stoped if limit or goto motor edge.
! Set West Limit: press Left/Right keys set current motor position to
be west limit
! Set East Limit: press Left/Right keys set current motor position to
be east limit
! Goto Reference: Press Left/Right key to move the motor to the reference position
! Disable Limit: Press Left/Right key to clear motor's all saved position
3.1.3 Set Location
If you connect a USALS positioner, first get your longitude and latitude,
then select the Motor type as DiSEqC1.3, and press Green key, the
following items will be displayed.
! Location: Press Left/Right keys to Select the local location of
predefined or manual input longitude and latitude
! Longitude Direction: Press Left/Right keys to select longitude as
East or West.
! Longitude Angle: press 0..9 numeric key to modify the local
longitude angle value.
! Latitude Direction: Press Left/Right keys to select longitude as North or South.
! Latitude Angle: press 0..9 numeric key to modify the local latitude angle value.
4. Channel Manager
This menu allows you delete channels, lock channels, move channels,
rename channels, set skip channel, sort channels and set favourite
channels etc.
! Press POS key to popup satellite list to choose edit satelite name
! Press Red key to move select channel to new position
! Press Green key to set channel whick can be skipped, if set skip,
when toggle channel, will cannot toggle to it
! Press Yellow key to set channel to be locked
! Press Blue key to delete channel
! Press FAV key to set channel to be favorite channel
! Press Info key to active a edit dialog to rename channel name