Copier Operating Instructions
Table Of Contents
- Copy Reference
- Safety Information
- How to Read this Manual
- Terms in this Manual
- What You Can Do With This Machine (Copy Mode)
- TABLE OF CONTENTS
- Guide to Components
- Operation Panel
- Panel Screen
- Basics
- Copying
- Before Copying
- Basic Procedure
- Setting Originals
- Repeat Copy
- Restart Copy
- Additional Copy
- Job Preset
- Interrupt Copy
- Basic Functions
- Copying from the Bypass Tray
- Setting the Length of Copy Paper Cut
- Program
- Other Functions
- Sample Copy
- Partial Copy
- Preset Reduce/Enlarge
- Zoom
- Fine Magnification
- Size Magnification
- Directional Magnification (%)
- Directional Size Magnification (mm)
- Margin Adjustment
- Shift
- Border Erase
- Delete Inside
- Delete Outside
- Double Copies
- Image Repeat
- Positive/Negative
- Mirror Image
- Image Overlay
- Format Overlay
- Background Numbering
- User Stamp Repeat
- Preset Stamp
- User Stamp
- Date Stamp
- Page Numbering
- Combination Chart
- Chart of Scan Sizes for Each Function
- Troubleshooting
- User Tools (Copier Features)
- Remarks
- Specification
- INDEX
- System Settings
Settings You Can Change with the User Tools
21
2
General Features 2/3
❖
❖❖
❖ Original Feed Delay 1
Specifies the length of the delay before an original is fed into the machine after
it has been set. If the originals are frequently fed at a slant, or you are using
special originals, set the delay to an appropriate setting.
Note
❒ Default: 1 second
❒ The time can be set from 1 to 5 seconds.
❖
❖❖
❖ Original Feed Delay 2
Specifies the length of the pause immediately after the originals are first fed
into the machine. If the originals are frequently fed at a slant, or you are using
special originals, set the delay to an appropriate setting.
Note
❒ Default: 1 second
❒ The time can be set from 0 to 5 seconds.
❖
❖❖
❖ Function Reset Timer
Specifies the length of the delay in switching from Copier function to the
Printer function, when the machine receives a print job.
• Instant
• Set Time (3-30 seconds)
Note
❒ Default: 3 seconds
❒ The time can be set from 3 to 30 seconds.
❖
❖❖
❖ System Reset Timer
After copying, or no other key operations are performed, the machine dis-
plays the function selected in the Function Priority setting after a specified pe-
riod. This is called a System Reset. This setting specifies the time interval for
the System Reset function.
Note
❒ Default: 60 seconds
❒ The time can be set to 0 and from 10 to 999 seconds.
❒ If this setting is set to 0, the System Reset function is turned off.
DolphinGB-Syst-F_V4_FM.book Page 21 Wednesday, May 2, 2001 1:19 PM