Copier Operating Instructions
Table Of Contents
- Copy Reference
- Safety Information
- How to Read this Manual
- Terms in this Manual
- What You Can Do With This Machine (Copy Mode)
- TABLE OF CONTENTS
- Guide to Components
- Operation Panel
- Panel Screen
- Basics
- Copying
- Before Copying
- Basic Procedure
- Setting Originals
- Repeat Copy
- Restart Copy
- Additional Copy
- Job Preset
- Interrupt Copy
- Basic Functions
- Copying from the Bypass Tray
- Setting the Length of Copy Paper Cut
- Program
- Other Functions
- Sample Copy
- Partial Copy
- Preset Reduce/Enlarge
- Zoom
- Fine Magnification
- Size Magnification
- Directional Magnification (%)
- Directional Size Magnification (mm)
- Margin Adjustment
- Shift
- Border Erase
- Delete Inside
- Delete Outside
- Double Copies
- Image Repeat
- Positive/Negative
- Mirror Image
- Image Overlay
- Format Overlay
- Background Numbering
- User Stamp Repeat
- Preset Stamp
- User Stamp
- Date Stamp
- Page Numbering
- Combination Chart
- Chart of Scan Sizes for Each Function
- Troubleshooting
- User Tools (Copier Features)
- Remarks
- Specification
- INDEX
- System Settings
User Tools (System Settings)
26
2
Key Operator Tools
If the access code function has been set, you cannot access the key operator func-
tion unless you enter the access code (up to 8 digits).
❖
❖❖
❖ Key Operator Access
The encrypted code used to access the management settings is called the ac-
cess code.
This setting specifies whether to use an access code (up to 8 digits) or not. You
can also store the access code when you use the management settings.
• Off
• On
Note
❒ Default: Off
❖
❖❖
❖ User Code Access
Specifies whether to use user codes to limit or monitor the count for the [Copier]
function.
❖
❖❖
❖ Key Counter Access
Specifies whether to use the optional key counter to manage the count for the
[Copier] function.
❖
❖❖
❖ Set Key Card
Specifies whether to use the optional key card to manage the count for the
[Copier] function.
❖
❖❖
❖ Auto Off Timer
After copying, or no other key operations are performed, the machine turns
itself off (apart from the main power switch) after a specified period. This is
called a Auto Off. This setting specifies the time interval before entering this
mode.
Note
❒ Default: 60 minutes
❒ The time can be set from 1 to 240 minutes.
❖
❖❖
❖ AOF (Keep It On.)
Makes the Auto Off Timer setting active. Leave this set to on.
For details about this function, contact your service representative.
• On
• Off
Note
❒ Default: On
DolphinGB-Syst-F_V4_FM.book Page 26 Wednesday, May 2, 2001 1:19 PM