Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=156 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=156 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.240000 mm Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine.
0827JupiterC1_Copy_EN_F1_FM.book Page i Thursday, September 4, 2003 5:06 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file.
0827JupiterC1_Copy_EN_F1_FM.book Page ii Thursday, September 4, 2003 5:06 PM ❖ Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Management Utilities”. • DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder V2 Lite in detail. This guide can be displayed from the [Setup] display when DeskTopBinder V2 Lite is installed.
0827JupiterC1_Copy_EN_F1_FM.book Page iii Thursday, September 4, 2003 5:06 PM What You Can Do with This Machine Color Copying (see p.29) You can switch the color copy mode depending on the type of originals used and the desired finish. Full Color Copy (see p.29) Black/White Copy (see p.29) Copies using four colors: yellow, magenta, cyan and black. Copies in black and white, even when the original is in color. Single Color Copy (see p.
0827JupiterC1_Copy_EN_F1_FM.book Page iv Thursday, September 4, 2003 5:06 PM Color Copying (see p.29) Convert Colors (see p.31) Stamping on Copies (see p.70) Copies by changing a specific color in the original to another color. Copies with the date, page numbers, etc. The stamp color can be yellow, red, cyan, magenta, green, blue, and black. Erase Specified Color (see p.32) Copies by deleting a specific color in the original. Printed inserts types: • Preset Stamp (p.70) • User Stamp (p.
0827JupiterC1_Copy_EN_F1_FM.book Page v Thursday, September 4, 2003 5:06 PM Adjusting Colors (see p.87) Primary Colors Yellow Green Colors can be created by combining the 3 primary colors: yellow, magenta and cyan. Black can be made by combining yellow, magenta and cyan, however, as there might be some slight differences, "black" will be expressed using a black toner. Red Black Cyan Magenta Blue Color Balance (see p.88) Adjust Color (see p.
0827JupiterC1_Copy_EN_F1_FM.book Page vi Thursday, September 4, 2003 5:06 PM What You Can Do with This Machine Functions differ depending on machine type and options. See p.4 “Functions Requiring Optional Configurations”. Types of Duplex Copies 1-sided 2 Pages 2-sided 1 Page (see p.55 " 1 Sided 2 Sided") 2-sided 1 Page 2-sided 1 Page (see p.55 " 2 Sided 2 Sided") 1-sided 4 Pages 2-sided 1 Page (see p.58 " 1 Sided 4 Pages Combine 2 Side") 2-sided 2 Pages 2-sided 1 Page (see p.
0827JupiterC1_Copy_EN_F1_FM.book Page vii Thursday, September 4, 2003 5:06 PM Copying Book Originals 1-sided Magazine (see p.61 " 1 Sided Magazine") Open to Left 1 2 5 2 7 8 7 1 4 8 1 3 5 3 6 Open to Right 1 2 5 7 7 2-sided 8 2 8 1 5 3 1 4 6 Magazine (see p.
0827JupiterC1_Copy_EN_F1_FM.book Page viii Thursday, September 4, 2003 5:06 PM Combining Multiple Pages onto a Single Page (see p.57 " One-Sided Combine") 1-sided 2 Pages 1-sided 1 Page 2-sided 1 Page 1-sided 4 Pages 1-sided 1 Page 2-sided 2 Pages 1-sided 1 Page 1-sided 8 Pages 1-sided 1 Page 2-sided 4 Pages 1-sided 1 Page Copying Originals Such as Books (see p.
0827JupiterC1_Copy_EN_F1_FM.book Page ix Thursday, September 4, 2003 5:06 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine ... iii What You Can Do with This Machine.................................................................. vi Notice ..................................................................................................................
0827JupiterC1_Copy_EN_F1_FM.book Page x Thursday, September 4, 2003 5:06 PM Copier Functions ................................................................................................. 33 Adjusting Copy Image Density ................................................................................. 33 Selecting the Original Type ...................................................................................... 34 Selecting Copy Paper ................................................................
0827JupiterC1_Copy_EN_F1_FM.book Page xi Thursday, September 4, 2003 5:06 PM 4. Troubleshooting If Your Machine Does Not Operate As You Want.............................................. 95 When a Message Is Displayed................................................................................. 95 If You Cannot Make Clear Copies....................................................................... 97 If You Cannot Make Copies As You Want .........................................................
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 1 Thursday, September 4, 2003 5:06 PM Notice Do not copy any item for which copying is prohibited by law. Copying the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, and driver's licenses. The color samples in this manual may differ slightly from the colors of actual copies. This machine has a function that prevents making counterfeit bank notes.
0827JupiterC1_Copy_EN_F1_FM.book Page 2 Thursday, September 4, 2003 5:06 PM How to Read This Manual Symbols This manual uses the following symbols: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury if you misuse the machine by not following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section in the General Settings Guide.
0827JupiterC1_Copy_EN_F1_FM.book Page 3 Thursday, September 4, 2003 5:06 PM Machine Types This machine comes in two models which vary by copy speed. To confirm which model you have, see the inside front cover of this manual.
0827JupiterC1_Copy_EN_F1_FM.book Page 4 Thursday, September 4, 2003 5:06 PM Functions Requiring Optional Configurations 2 tray finisher *1 Booklet finisher *1 4 *1 ❍ ❍ ❍ ❍ ❍ ❍ The paper tray unit is required in order to install the finisher. Punch ❍ Staple Mixed Size ❍ Stack SADF Auto Document Feed- ❍ er (ADF) Shift Sort Batch Function Staple (Saddle Stitch) Certain functions require special machine configuration and extra options. See the table below.
0827JupiterC1_Copy_EN_F1_FM.book Page 5 Thursday, September 4, 2003 5:06 PM Control Panel This illustration shows the control panel of a machine with options fully installed. AAE035S 1. Screen Contrast knob 4. {Adjust/Program Color}} key Adjusts display panel brightness. Use this key to adjust and register colors. See p.87 “Color Adjustment/Program”, p.92 “User Color”. 2. {User Tools/Counter}} key • User Tools Press to change the defaults and conditions to meet your requirements. See p.
0827JupiterC1_Copy_EN_F1_FM.book Page 6 Thursday, September 4, 2003 5:06 PM 10. {Energy Saver}} key 17. {#}} key Press to switch into and out of Energy Saver mode. See “Saving Energy”, General Settings Guide. Press to enter a numerical value. 11. {Interrupt}} key Press interrupt a long copy job to make copies during copying or scanning. See p.20 “Interrupt Copy”. 12. Main power indicator and On indicator The main power indicator turns on when you turn on the main power.
0827JupiterC1_Copy_EN_F1_FM.book Page 7 Thursday, September 4, 2003 5:06 PM Display Panel The function items displayed serve as selector keys. You can select or specify an item by lightly pressing them. When you select or specify an item on the display panel, it is highlighted like this: . Keys appearing as cannot be used. Note ❒ The following illustration is an example of the panel display when the booklet finisher and 2 tray paper unit installed. ❖ Initial copy display AAE038S 1.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 9 Thursday, September 4, 2003 5:06 PM 1. Placing Originals Originals Note ❒ Highlighter pen colors are difficult to reproduce. Depending on the color used, they may not come out on copies, or may come out as a different color.
0827JupiterC1_Copy_EN_F1_FM.book Page 10 Thursday, September 4, 2003 5:06 PM Placing Originals Originals not recommended for the Auto Document Feeder (ADF) Placing the following types of originals in the ADF can cause paper misfeeds or result in damage to the originals. Place these originals on the exposure glass instead. • Originals other than those specified on p.9 “Sizes and Weights of Recommended Originals”.
0827JupiterC1_Copy_EN_F1_FM.book Page 11 Thursday, September 4, 2003 5:06 PM Originals Sizes Detectable by Auto Paper Select ❍ : Detectable size × : Undetectable size 1 ❖ Metric version Size A3 L Location of the original A4 B5 A5 B6 11" × B4 KL JISK 17" JISL KL JIS KL L L 81/2" × 14" L 81/2" × 11" KL 51/2" × 8 1/ 2" KL 81/2" × 13" L Exposure glass ❍ ❍ ❍ ❍ × × × × × × ❍ ADF ❍ ❍ ❍ ❍ ❍ ❍ ❍ × ❍ × ❍ *1 *1 The machine cannot detect two-sided originals of B6 JIS size.
0827JupiterC1_Copy_EN_F1_FM.book Page 12 Thursday, September 4, 2003 5:06 PM Placing Originals Note ❒ When copying custom size originals, make sure you specify the size of the originals. If not, the image may not be copied properly. See p.17 “Placing custom size originals”. 1 Sizes difficult to detect It is difficult for the machine to automatically detect the sizes of the following types of originals, so select the paper size manually.
0827JupiterC1_Copy_EN_F1_FM.book Page 13 Thursday, September 4, 2003 5:06 PM Placing Originals Placing Originals Note ❒ Place originals only when all correction fluid and ink has completely dried. Not taking this precaution could dirty the exposure glass, thus resulting in blemished copies. Reference For original sizes you can set, see p.9 “Originals”. ❖ 90°° turn Use this to copy A3K, B4 JISKor 11" × 17"K size originals. The machine rotates the copy image by 90°.
0827JupiterC1_Copy_EN_F1_FM.book Page 14 Thursday, September 4, 2003 5:06 PM Placing Originals A Press [Special Original]. Placing Originals on the Exposure Glass A Lift 1 the exposure glass cover or the ADF. B Select the original orientation. Standard orientation A Make sure is selected. Important ❒ Do not lift the exposure glass cover or the ADF forcefully. O t h e r w is e , t h e A D F c o v e r might open or be damaged. Note ❒ Be sure to lift the exposure glass cover or ADF more than 30°.
0827JupiterC1_Copy_EN_F1_FM.book Page 15 Thursday, September 4, 2003 5:06 PM Placing Originals Placing Originals in the Auto Document Feeder Settings should be made accordingly in the following situations: A Set the document guide to the original size. B Place the aligned originals face up into the ADF. 1 ❖ When placing originals consisting of more than 80 pages: p.15 “Batch” ❖ When placing originals one by one: p.16 “SADF” ❖ When placing originals of the same width but different sizes: p.
0827JupiterC1_Copy_EN_F1_FM.book Page 16 Thursday, September 4, 2003 5:06 PM Placing Originals A Press [Special Original]. Reference For related default settings, see p.116 “Shortcut R/E”. A Press [Special Original]. 1 B Press [Batch], and then press [OK]. Note ❒ If [SADF] is displayed, change the settings. See p.124 “Switch to Batch (SADF)”. C Place the first installment of the originals, and then press the {Start} } key. D After the originals has been fed, place the next installments.
0827JupiterC1_Copy_EN_F1_FM.book Page 17 Thursday, September 4, 2003 5:06 PM Placing Originals C Align the rear and left edges of Note ❒ When placing same width originals of different sizes in the ADF and making copies without using the Mixed size function, parts of the original image might not be copied, or the paper might jam. ❒ Copy speed and scanning speed may slow down. ❒ You can place originals of two different sizes at once.
0827JupiterC1_Copy_EN_F1_FM.book Page 18 Thursday, September 4, 2003 5:06 PM Placing Originals C Enter the horizontal size of the original using the number keys, and then press [#]. Note ❒ If you make a mistake, press [Clear] or the {Clear/Stop} } key, and then enter the value again. 1 D Enter the vertical size of the original using the number keys, and then press [#]. E Press [OK]. F Place the originals, and then press the {Start} } key.
0827JupiterC1_Copy_EN_F1_FM.book Page 19 Thursday, September 4, 2003 5:06 PM 2. Copying Basic Procedure A When the machine is set for user codes, enter a user code (up to eight digits) using the number keys, and then press the {#} } key. The machine is now ready to copy. Reference For users codes, see “Key Operator Tools”, General Settings Guide. d Ready" is shown B Make sure "d on the display. If any other function is displayed, press the {Copy} } key.
0827JupiterC1_Copy_EN_F1_FM.book Page 20 Thursday, September 4, 2003 5:06 PM Copying Interrupt Copy Use this function to interrupt a long copy job to make urgently needed copies. Limitation ❒ You cannot use Interrupt Copy whe n fax o rig inals are being scanned. 2 A Press the {Interrupt}} key. The Interrupt indicator lights. When scanning is interrupted A Remove the originals that were being copied, and then place the originals you want to copy. B Press the {Start} } key. Copying starts.
0827JupiterC1_Copy_EN_F1_FM.book Page 21 Thursday, September 4, 2003 5:06 PM Basic Procedure Left Original Beeper The beeper sounds and an error message is displayed if you leave originals on the exposure glass after copying. Note ❒ See p.114 “Tone: Original remains”. Job Preset D Press [To "Printing"]. Returns to the initial copy display. After the current copy job, the next job starts automatically. Note ❒ You can switch the display to the current copy job by pressing [To "Printing"].
0827JupiterC1_Copy_EN_F1_FM.book Page 22 Thursday, September 4, 2003 5:06 PM Copying Copying from the Bypass Tray Use the bypass tray to copy onto special paper such as OHP transparencies, thick paper, thin paper, and copy paper that cannot be loaded in the paper trays. 2 Preparation When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series] (for example [1 Sided] → [1 Sided].
0827JupiterC1_Copy_EN_F1_FM.book Page 23 Thursday, September 4, 2003 5:06 PM Copying from the Bypass Tray B Insert the paper with the side you want to copy facing up until you hear the beep, and align the paper guide to the paper size. When copying onto standard size paper A Press the {#} } key. The "Bypass Tray Paper" screen is displayed. B Press [Select Size]. 2 ZKVH130J 1: Extender Important ❒ If the guides are not flush against the copy paper, image skewing or misfeeds might occur.
0827JupiterC1_Copy_EN_F1_FM.book Page 24 Thursday, September 4, 2003 5:06 PM Copying D Enter the horizontal size of the paper using the number keys, and then press [#]. Note ❒ If [Horiz] is not highlighted, press [Horiz]. ❒ To register the custom size entered, press [Program], and then press [Exit]. 2 When copying onto OHP Transparencies or Thick Paper To make copies onto OHP transparencies or thick paper, you need to specify the paper type and size. See p.23 “When copying onto standard size paper”, p.
0827JupiterC1_Copy_EN_F1_FM.book Page 25 Thursday, September 4, 2003 5:06 PM Copying from the Bypass Tray D Select [OHP Sheet] or [Thick Paper]. When Copying on the Back Side of the Paper Using the bypass tray, you can make copies on the back of paper which has already been copied on the other side. E Select the paper size. F Press [OK] twice. G Place the originals, and then press the {Start} } key. Important ❒ When copying onto OHP transparencies, remove copied sheets one by one.
0827JupiterC1_Copy_EN_F1_FM.book Page 26 Thursday, September 4, 2003 5:06 PM Copying ❖ Top to bottom When copying onto envelopes Note ❒ When placing an original on the exposure glass, place the original with the bottom line aligned to the left scale. ❒ When placing originals in the ADF, place the originals with the bottom line inserted in the ADF. ❒ When inserting envelopes, be sure to unfold the flaps and position them opposite to the paper feed direction.
0827JupiterC1_Copy_EN_F1_FM.book Page 27 Thursday, September 4, 2003 5:06 PM Copying from the Bypass Tray F Place the originals, and then press the {Start} } key. G When your copy job is finished, press the { Clear Modes} } key to clear the settings.
0827JupiterC1_Copy_EN_F1_FM.book Page 28 Thursday, September 4, 2003 5:06 PM Copying Making A3, 11" × 17" Full Bleed Copies You can make A3, 11" × 17" full bleed copies with 12" × 18" paper. This is useful for making A3, 11" × 17" size copies with a colored background (e.g. catalogues). 2 1. A3, 11" × 17" size Original 2. In standard copy mode, margins 3. 12" × 18" Full Bleed Copy 4.
0827JupiterC1_Copy_EN_F1_FM.book Page 29 Thursday, September 4, 2003 5:06 PM Color Functions Color Functions Selecting a Color Mode Select a Color mode that best suits your originals and copying requirements. Reference For color images, see p.iii “What You Can Do with This Machine ” The following basic functions are explained in this section. ❖ Auto Color Selection Judges the color of the original automatically, and copies either in full color or black/white.
0827JupiterC1_Copy_EN_F1_FM.book Page 30 Thursday, September 4, 2003 5:06 PM Copying When the {Single Color} } key is selected When the {Two-color} } key is selected A Select designation method of col- A Select either [Two-color] or [Red & or ( [Basic Color], [User Color] ). Black]. 2 B Select the color, and then press [OK]. Note ❒ When copied using the registered color, the original will be copied lighter than the registered color.
0827JupiterC1_Copy_EN_F1_FM.book Page 31 Thursday, September 4, 2003 5:06 PM Color Functions Convert Colors Copies by changing the color in the original to a different color. Note ❒ It is possible to specify up to 4 colors. ❒ The width of the color to be converted can be adjusted in 5 levels. If the color width is set to “Wider” and red has been specified, colors which are close to magenta or orange, will also be converted. The color width can be adjusted in the “User Tools”. See p.
0827JupiterC1_Copy_EN_F1_FM.book Page 32 Thursday, September 4, 2003 5:06 PM Copying 2 Erase Color Color Background You can erase a certain color in the image of the original. Copies by adding a color in the whole page. Note ❒ It is possible to select up to 4 colors. ❒ The width of the color to be deleted can be adjusted in 5 levels. If the color width is set to “Wider” and red has been specified, colors which are close to magenta or orange, will also be deleted.
0827JupiterC1_Copy_EN_F1_FM.book Page 33 Thursday, September 4, 2003 5:06 PM Copier Functions Copier Functions Adjusting Copy Image Density There are three types of adjustment available: ❖ Auto Image Density The machine automatically adjusts image density. Manual image density A Press [Auto Image Density] to cancel it. 2 B Press [Lighter] or [Darker] to adjust image density. ❖ Manual image density You can adjust the general density of the original in nine increments.
0827JupiterC1_Copy_EN_F1_FM.book Page 34 Thursday, September 4, 2003 5:06 PM Copying Selecting the Original Type Select one of the following six types to match originals: ❖ Text When originals contain only text (no pictures). 2 ❖ Text/Photo When originals contain photographs or pictures alongside the text. ❖ Photo When you need to reproduce delicate tones of photographs and pictures.
0827JupiterC1_Copy_EN_F1_FM.book Page 35 Thursday, September 4, 2003 5:06 PM Copier Functions Selecting Copy Paper There are two ways to select copy paper: ❖ Auto Paper Select The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio. 2 ❖ Manual Paper Select Choose the paper you want to copy onto from a paper tray, bypass tray, or Large Capacity Tray (LCT). Reference p.12 “Sizes difficult to detect” p.
0827JupiterC1_Copy_EN_F1_FM.book Page 36 Thursday, September 4, 2003 5:06 PM Copying Auto Paper Select A Make sure [Auto Paper Select] is selected. 2 Note ❒ Trays with a key mark are not automatically selected. See “Paper Type” in “Tray Paper Settings”, General Settings Guide. Manual Paper Select A Select the paper tray, bypass tray or LCT. The selected paper tray is highlighted. Reference p.22 “Copying from the Bypass Tray” If the paper type keys are not displayed A Press [Auto Paper Select].
0827JupiterC1_Copy_EN_F1_FM.book Page 37 Thursday, September 4, 2003 5:06 PM Copier Functions - Rotated copy If the orientation of the original (L or K) is different to that of the paper you are copying onto, this function rotates the original image by 90°, fitting it onto the copy paper. This function works when [Auto Paper Select] or [Auto Reduce/Enlarge] is selected. See p.35 “Auto Paper Select”, p.40 “Auto Reduce/Enlarge”.
0827JupiterC1_Copy_EN_F1_FM.book Page 38 Thursday, September 4, 2003 5:06 PM Copying A Press [Reduce/Enlarge]. Preset Reduce/Enlarge You can select a preset ratio for copying. 2 ❖ Base Point The base point of Reduce/Enlarge differs depending on how the original was scanned. When the original is placed on the exposure glass, the upper left corner is the base point. When placed in the ADF, the bottom left corner is the base point.
0827JupiterC1_Copy_EN_F1_FM.book Page 39 Thursday, September 4, 2003 5:06 PM Copier Functions A Press [Create Margin] on the initial display. B Enter the ratio. To select the ratio using [n n] and [o o] A Select a preset ratio close to the ratio using [Reduce] or [Enlarge]. B Adjust the ratio further, using [n n] or [o o]. B If you do not want to combine it with the Reduce/Enlarge function, place originals, and then press the {Start} } key.
0827JupiterC1_Copy_EN_F1_FM.book Page 40 Thursday, September 4, 2003 5:06 PM Copying Auto Reduce/Enlarge The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. ❒ You cannot use the Rotated Copy function when enlarging to B4 JIS, A3 or 81/2" × 14", 11" × 17". When enlarging to B4 JIS, A3 or 81/2" × 14", 11" × 17" size copy paper, place the original in the L orientation. Reference p.
0827JupiterC1_Copy_EN_F1_FM.book Page 41 Thursday, September 4, 2003 5:06 PM Copier Functions E Enter the length of the copy using Size Magnification the number keys, and then press [#]. You can calculate an enlargement or reduction ratio based on the lengths of the original and copy. A" Note ❒ To change the length after pressing [#], select [Original] or [Copy], and then enter the length. 2 F Press [OK] twice. G Place the originals, and then press a" the {Start} } key.
0827JupiterC1_Copy_EN_F1_FM.book Page 42 Thursday, September 4, 2003 5:06 PM Copying B Press [Specifd. Ratio]. C Press [Direct. Mag.%]. To enter the ratio using the number keys A Press [Horizontal]. B Enter the ratio using the number keys, and then press [#]. C Press [Vertical]. D Enter the ratio using the number keys, and then press [#]. E Press [OK]. 2 To specify a ratio using [n n] and [o o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n n] or [o o].
0827JupiterC1_Copy_EN_F1_FM.book Page 43 Thursday, September 4, 2003 5:06 PM Copier Functions A Press [Reduce/Enlarge]. Sort The machine can scan originals into memory and automatically sort copies. Reference Related default settings: B Press [Specifd. Ratio]. C Press [Dirc. Size Mag In]. D Enter the horizontal size of the original using the number keys, and then press [#]. E Enter the horizontal size of the copy using the number keys, and then press [#]. 2 p.124 “Select Stack Function” p.
0827JupiterC1_Copy_EN_F1_FM.book Page 44 Thursday, September 4, 2003 5:06 PM Copying ❖ Shift Sort • When a finisher is installed: Each time the copies of one set or a job are delivered, the next copy is shifted to separate each set or job. ❖ When the booklet finisher is installed 2 Note ❒ You cannot use the bypass tray with this function. A Press [Sort] or [Rotate Sort]. ❖ When a finisher is not installed Note ❒ When the optional finisher is installed, use the User Tools to display [Rotate Sort].
0827JupiterC1_Copy_EN_F1_FM.book Page 45 Thursday, September 4, 2003 5:06 PM Copier Functions Sample copy Changing the number of sets You can use this function to check copy settings before making a long copy run. You can change the number of copy sets during copying. Note ❒ This function can be used only when the Sort function is turned on. A Select Sort and any other necessary functions, and then place the originals. Note ❒ This function can only be used when the Sort function is turned on.
0827JupiterC1_Copy_EN_F1_FM.book Page 46 Thursday, September 4, 2003 5:06 PM Copying C Place the originals, and then press Stack the {Start} } key. Copies can be assembled with each page shifted. ❖ When a finisher is installed This function groups together copies of each page in a multi-page original. Every other page stack is shifted for ease of separation. 2 333 Note ❒ You cannot use the bypass tray with this function. A Press [Stack]. B Enter the number of copies using the number keys.
0827JupiterC1_Copy_EN_F1_FM.book Page 47 Thursday, September 4, 2003 5:06 PM Copier Functions Staple Individual copy sets can be stapled. 2 Note ❒ You cannot use the bypass tray with this function. Reference p.125 “Select Stapling Position” Stapling position and original setting Place all the originals in an orientation in which they can be read. They will be automatically rotated for copying.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 49 Thursday, September 4, 2003 5:06 PM Copier Functions ❖ Booklet finisher Original location Exposure glass ADF Stapling position *1 Top K 2 L Bottom K L Left 2 K *2 L Saddle Stitch Top 2 K *1 *2 L *2 L This table shows the stapling positions, not the orientation of delivery. Not available for A3, B4 JIS or 11" × 17", 81/2" × 14" size paper.
0827JupiterC1_Copy_EN_F1_FM.book Page 50 Thursday, September 4, 2003 5:06 PM Copying A Select one of the stapling positions. ❖ 2 tray finisher 2 ❖ Booklet finisher Note ❒ When you select the stapling position, the Sort function is automatically selected. Reference p.47 “Stapling position and original setting” p.132 “Staple” B Enter the number of copy sets using the number keys. C Place the originals, and then press the {Start}} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 51 Thursday, September 4, 2003 5:06 PM Copier Functions Punch You can make punch holes in copies. ❖ 2 holes 2 GCPNCH1E ❖ 3 holes GCPNCH3E ❖ 4 holes GCPNCH0E Note ❒ 3 holes is only available with the 2 tray finisher. ❒ You cannot use the bypass tray with this function.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 54 Thursday, September 4, 2003 5:06 PM Copying ❖ Booklet finisher Original location Exposure glass 2 holes 2 ADF Punch hole positions *1 K Standard L 4 holes K L 2 holes K 90º Turn L 4 holes K L *1 This table shows the punch hole positions, not the orientation of delivery. A Select one of the punch hole positions. 54 B Enter the number of copy sets with the number keys. C Place the originals, and then press the {Start}} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 55 Thursday, September 4, 2003 5:06 PM Copier Functions Duplex There are three types of duplex copies: ❖ 1 Sided→ →2 Sided Copies 2 one-sided pages onto a two-sided page. Original orientation and completed copies Copy images differ according to the orientation in which you place originals (vertical K or horizontal L ). 2 ❖ 2 Sided→ →2 Sided Copies 1 two-sided page onto a two-sided page.
0827JupiterC1_Copy_EN_F1_FM.book Page 56 Thursday, September 4, 2003 5:06 PM Copying A Press [Dup./Combine/Series]. ❒ When placing originals on the exposure glass or in the ADF using the Batch function, press the { #} } key after all the originals have been scanned. Originals and copy orientation 2 You can select the orientation. • Top to Top Note ❒ You can also select "1 Sided to 2 Sided" or "2 Sided to 2 Sided" directly, by pressing the Copy Function Key. If you do this, proceed to step D.
0827JupiterC1_Copy_EN_F1_FM.book Page 57 Thursday, September 4, 2003 5:06 PM Copier Functions 1 Sided Combine Combine several pages onto one side of a sheet. ❖ Orientation of the original and combine image position • Open to left R originals ❖ 1 Sided 2 Pages → Combine 1 Side Copies 2 one-sided originals onto one side of a sheet. 2 GCSHUY1E • Open to top S originals GCSHUY2E GCSHVY7E ❖ 1 Sided 4 Pages → Combine 1 Side Copies 4 one-sided originals onto one side of a sheet.
0827JupiterC1_Copy_EN_F1_FM.book Page 58 Thursday, September 4, 2003 5:06 PM Copying Reference Related default settings: p.118 “Erase Original Shadow in Combine” p.119 “Copy Order in Combine” p.120 “Separation Line in Combine” 2 A Press [Dup./Combine/Series]. E Press [OK]. F Place the originals, and then press the {Start} } key. 2 Sided Combine Combines various pages of originals onto a two-sided sheet. ❖ 1 Sided 4 Pages → Combine 2 Side Copies 4 one-sided originals onto a sheet, two pages per side.
0827JupiterC1_Copy_EN_F1_FM.book Page 59 Thursday, September 4, 2003 5:06 PM Copier Functions ❖ 1 Sided 16 Pages → Combine 2 Side Copies 16 one-sided originals onto a sheet, eight pages per side. ❖ 2 Sided 16 Pages → Combine 2 Side Copies 8 two-sided originals onto a sheet, eight pages per side. 2 GCSHVY6E GCSHVY5E 1. Front 2. Back ❖ 2 Sided 4 Pages → Combine 2 Side Copies 2 two-sided originals onto a sheet, two pages per side. Note ❒ You cannot use the bypass tray with this function.
0827JupiterC1_Copy_EN_F1_FM.book Page 60 Thursday, September 4, 2003 5:06 PM Copying B Press [1 Sided] or [2 Sided] for Orig- ❖ Book→ →2 Sided Copies a two-page spread original onto a sheet, one page per side. Reference p.56 “Originals and copy orientation” ❖ Front&Back→ →2 Sided Copies both sides of a two-page spread original onto both sides of a sheet. inal, and then press [Combine 2 Side] for Copy. 2 C Select the number of originals to combine, and then press [OK]. D Select the paper size.
0827JupiterC1_Copy_EN_F1_FM.book Page 61 Thursday, September 4, 2003 5:06 PM Copier Functions ❖ Inch version Original 81/2" × 11"L Paper for one-sided copy Paper for two-side copy 51/2" × 81/2"K × 2 sheets 51/2" × 11"K × 1 sheet (twosided) ❒ You cannot use the bypass tray with Book→2 Sided or Front&Back→2 Sided. Copying Book Originals Copies two or more originals in page order. ❖ 1 Sided→ →Magazine Copies two or more originals into magazine page order copies (when folded and stacked).
0827JupiterC1_Copy_EN_F1_FM.book Page 62 Thursday, September 4, 2003 5:06 PM Copying ❖ 2 Sided→ →Magazine Copies two or more two-sided originals into magazine page order copies (when folded and stacked). ❖ Open to right ❖ Open to left 2 GCBOOK6E GCAH030E ❖ Open to right Note ❒ You cannot use the bypass tray with this function. ❒ The machine sets the reproduction ratio automatically to fit the paper size. Reference Related default settings: p.
0827JupiterC1_Copy_EN_F1_FM.book Page 63 Thursday, September 4, 2003 5:06 PM Copier Functions Image Repeat The original image is copied repeatedly. K/Copy paper: ❖ Original: 51/2" × 81/2"K K or Original: 51/2" × 81/2" 81/2" × 11"K L/Copy paper 81/2" × 11"L L 4 repeats (65%) 16 repeats (32%) 2 Repeat2 Repeat1 There are two types of designation methods for Image Repeat. ❖ Whole Area Repeat Repeatedly copies the entire image. ❖ Specified Area Repeat Repeatedly copies a specified portion of the image.
0827JupiterC1_Copy_EN_F1_FM.book Page 64 Thursday, September 4, 2003 5:06 PM Copying Specified Area Repeat You can use this function only when you are making a copy from the Exposure Glass. Note ❒ The base point X1, Y1, and the length set by point X2, Y2 determines the area of an image repeatedly copied. 2 Limitation ❒ You cannot use the specified area repeat from ADF. G Enter the length of [X1] with the number keys, then press [#]. H Enter the length of [Y1] with the number keys, then press [#].
0827JupiterC1_Copy_EN_F1_FM.book Page 65 Thursday, September 4, 2003 5:06 PM Copier Functions ❖ Metric version Original size and orientation Copy paper size and orientation A5L A4K B6 JISL B5 JISK A4K A3L A5K A4L B5 JISK B4 JISL B6 JISK B5 JISL E Select the paper. F Place the originals, and then press the {Start} } key. Centering 2 You can make copies with the image moved to the center.
0827JupiterC1_Copy_EN_F1_FM.book Page 66 Thursday, September 4, 2003 5:06 PM Copying A Select the paper. B Press [Edit/Color Creation]. ❒ If [Two-color] (normal) is selected, the white part of the original becomes black and the black part becomes white, and the colored part is copied with the specified color. ❒ If [Red & Black] is selected, the white part of the original becomes black, and the black part becomes white, but the red part is copied as red color. 2 C Press [Edit Image]. D Press [Centering].
0827JupiterC1_Copy_EN_F1_FM.book Page 67 Thursday, September 4, 2003 5:06 PM Copier Functions Erase You can erase the center and/or all four sides of the original image. This function has three modes: ❖ Center/Border Erases both the original's center and edge margins from the copy. ❖ Border Erases the original's edge margin from the copy. 2 GCCENT3E Reference The erase width is set to 10 mm (0.4”) as default. You can change this setting with User Tools.
0827JupiterC1_Copy_EN_F1_FM.book Page 68 Thursday, September 4, 2003 5:06 PM Copying Border Erase Selecting [Diff. Width] A Press [Edit/Color Creation]. A Press [Diff. Width]. B Press the key for the border you want to change, and then set the erase border width using [n n] and [o o]. 2 B Press [Erase/Margin Adj]. C Press [Erase]. D Set the erase border width. Selecting [Same Width] A Press [Same Width]. B Set the erase border width using [n n] and [o o]. C Press [OK]. E Press [OK] twice.
0827JupiterC1_Copy_EN_F1_FM.book Page 69 Thursday, September 4, 2003 5:06 PM Copier Functions Center/border erase Selecting [Diff. Width] A Press [Edit/Color Creation]. A Press [Diff. Width]. B Press the key for the part you want to change, and then set the erase margin width using [n n] and [o o]. B Press [Erase/Margin Adj]. C Press [Erase]. D Press [Center/Border]. E Set the center and border 2 C Press [OK]. to be erased. Selecting [Same Width] A Press [Same Width].
0827JupiterC1_Copy_EN_F1_FM.book Page 70 Thursday, September 4, 2003 5:06 PM Copying Note ❒ You can change the width of the binding margin as follows: 2 Metric version 0–30 mm (increments of 1 mm) Inch version 0"–1.2" (increments of 0.1") A Press [Edit/Color Creation]. B Press [Erase/Margin Adj]. C Press [Margin Adjustment]. D Set a binding margin for the front pages. Press [← ←] and [→ →] when setting the left and right margins, and [↓ ↓] and [↑ ↑] when setting the top and bottom margins.
0827JupiterC1_Copy_EN_F1_FM.book Page 71 Thursday, September 4, 2003 5:06 PM Copier Functions Stamp position and original orientation B Press [Stamp]. C Press [Preset Stamp]. D Select the message. E Press [All Pages] or [1st Page only] to select the print page. 2 Note ❒ You can change the color, position, size, and density of the stamp. See p.71 “Changing the stamp color”. See p.71 “To change stamp position, size, and density”. F After you have specified all necessary settings, press [OK].
0827JupiterC1_Copy_EN_F1_FM.book Page 72 Thursday, September 4, 2003 5:06 PM Copying User Stamp Reference Related default settings: Prints a registered stamp onto copies. p.122 “Stamp Position 1 - 4” p.122 “Stamp Format 1 - 4” p.122 “Stamp Color: 1 - 4” A Press [Edit/Color Creation]. 2 GCSTMP0E Preparation You have to register a user stamp before using this function. See p.73 “To program the user stamp”. Stamp position and original orientation B Press [Stamp]. C Press [User Stamp].
0827JupiterC1_Copy_EN_F1_FM.book Page 73 Thursday, September 4, 2003 5:06 PM Copier Functions Changing the stamp color C Press [Copier/Document Server Fea- tures]. A Press [Stamp Color]. B Select the stamp color, then press [OK]. 2 To change the stamp position A Press [Change]. B Select the position, and then press [OK]. D Press [Stamp]. E Press [User Stamp]. F Press [Program/Delete Stamp]. G Press [Program], and then press the stamp number (1–4) you want to program.
0827JupiterC1_Copy_EN_F1_FM.book Page 74 Thursday, September 4, 2003 5:06 PM Copying K Press [Vertical], and then enter the vertical size of the stamp using the number keys, and then press [#]. C Press [Copier/Document Server Fea- tures]. L Place the original for user stamp on the exposure glass, and then press [Start Scanning]. The original is scanned, and the stamp is registered. 2 Note ❒ Originals cannot be scanned from the ADF when programming the user stamp. M Press [Exit]. N Press [Exit].
0827JupiterC1_Copy_EN_F1_FM.book Page 75 Thursday, September 4, 2003 5:06 PM Copier Functions Stamp position and original orientation Date Stamp You can use this function to print dates onto copies. 2 GCSTMP3E You can select from the following date formats: • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY • DD.MM.YYYY • YYYY.MM.DD GCSTMP7E Note ❒ You cannot use the bypass tray with this function. ❒ The default stamp color is black. Reference Related default settings: p.122 “Format” p.122 “Font” p.
0827JupiterC1_Copy_EN_F1_FM.book Page 76 Thursday, September 4, 2003 5:06 PM Copying A Press [Edit/Color Creation]. Changing the stamp color A Press [Stamp Color]. B Select the stamp color, then press [OK]. 2 To change the date format B Press [Stamp]. C Press [Date Stamp]. D Press [All Pages] or [1st Page only] to A Press [Change Format]. select the print page. B Select the date format, and then press [OK].
0827JupiterC1_Copy_EN_F1_FM.book Page 77 Thursday, September 4, 2003 5:06 PM Copier Functions Stamp position and orientation of originals Page Numbering You can use this function to print page numbers onto copies. 2 CP2G0100 There are six types of Page Numbering (“n” is the total number of pages in original): • P1, P2,…Pn • 1/n, 2/n,...n/n • -1-, -2-,...-n• P.1, P.2,...P.n • 1, 2…n • 1-1, 1-2,..1-n Note ❒ You cannot use the bypass tray with this function. ❒ The default stamp color is black.
0827JupiterC1_Copy_EN_F1_FM.book Page 78 Thursday, September 4, 2003 5:06 PM Copying A Press [Edit/Color Creation]. Changing the stamp color A Press [Stamp Color]. B Select the stamp color, then press [OK]. 2 To change the stamp position B Press [Stamp]. C Press [Page Numbering]. D Select the format. Note ❒ You can specify the Stamp Color, position, pages to be stamped, and numbering.
0827JupiterC1_Copy_EN_F1_FM.book Page 79 Thursday, September 4, 2003 5:06 PM Copier Functions B Press [First Printing Page], then enter the original page number from which to start printing using the number keys, and then press the {#} } key. D Press [Last Number], enter the num- ber of the page to stop numbering using the number keys, and then press the {#} } key. 2 Note ❒ To change the number entered, press [Clear] or the {Clear/Stop} } key, and then enter a new number.
0827JupiterC1_Copy_EN_F1_FM.book Page 80 Thursday, September 4, 2003 5:06 PM Copying Note ❒ You can enter between 1 and 9999 for the original page number from which to start printing. ❒ To change the number entered, press [Clear] or the {Clear/Stop} } key, and then enter a new number. 2 C Press [Numbering from/to], then enter the number of page from which to start numbering using the number keys, and then press the {#} } key. If you selected (1-1, 1-2,…) A Press [Change] on the right hand side.
0827JupiterC1_Copy_EN_F1_FM.book Page 81 Thursday, September 4, 2003 5:06 PM Copier Functions Covers You can use this function to create cover sheets by adding additional pages of different paper, or copying existing pages onto different paper. ❖ Front/Back covers The first and last page of original is copied onto a specified cover sheet paper. • Copy 2 Preparation Before selecting this function, set the tray for front cover sheets.
0827JupiterC1_Copy_EN_F1_FM.book Page 82 Thursday, September 4, 2003 5:06 PM Copying Slip Sheets Every time the originals' page changes, a slip sheet is inserted. This function can be used to automatically insert a slip sheet between OHP transparencies, or as a stacking function. You can also copy onto slip sheets. 2 A Press [Cover/Slip Sheet]. 1 1 2 3 Note ❒ Press the {#} } key and select [OHP Sheet] in Special paper. See p.24 “When copying onto OHP Transparencies or Thick Paper”.
0827JupiterC1_Copy_EN_F1_FM.book Page 83 Thursday, September 4, 2003 5:06 PM Storing Data in the Document Server Storing Data in the Document Server The Document Server enables you to store documents in memory and print them as you want. Important ❒ Machine failure can result in data loss. Important data stored on the hard disk should be backed up. The manufacturer shall not be responsible for any damage that might result from loss of data.
0827JupiterC1_Copy_EN_F1_FM.book Page 84 Thursday, September 4, 2003 5:06 PM Copying ❒ To check that the document has been stored, press the { Document Server} } key to display the document selection screen. ❒ When the machine is printing a document stored using the copier function, wait until printing has finished before you store another copy document. ❒ To print stored documents, see “Printing Stored Documents”, General Settings Guide.
0827JupiterC1_Copy_EN_F1_FM.book Page 85 Thursday, September 4, 2003 5:06 PM Programs Programs You can store frequently used copy job settings in machine memory and recall them for future use. Note ❒ You can store up to 10 programs. ❒ You can select the standard mode or program No. 10 as the default mode to be set when modes are cleared or reset, or immediately after the operation switch is turned on. See p.113 “Change Initial Mode”. ❒ Paper settings are stored based on paper size.
0827JupiterC1_Copy_EN_F1_FM.book Page 86 Thursday, September 4, 2003 5:06 PM Copying F Press [OK]. When the settings are successfully stored, the program name is displayed on the right side of the registered program number. The display returns to the initial copy display for a while. 2 Changing a stored program A Check the program settings. D Press [Yes]. The program is deleted, and the display returns to the initial copy display. Recalling a Program A Press the {Program}} key. B Press [Recall].
0827JupiterC1_Copy_EN_F1_FM.book Page 87 Thursday, September 4, 2003 5:06 PM 3. Color Adjustment/Program Color Adjustment This function lets you alter up to three single colors by mixing them with adjacent colors in the color circle. Reference For types and examples of image adjustment functions, see p.iii “What You Can Do with This Machine ”. Note ❒ You can adjust up to 3 colors from yellow, red, magenta, blue, cyan, or green at the same time.
0827JupiterC1_Copy_EN_F1_FM.book Page 88 Thursday, September 4, 2003 5:06 PM Color Adjustment/Program Color Balance You can adjust the overall color tone when the overall copy is reddish or bluish. Reference For types and examples of the image adjustment functions, see p.iii “What You Can Do with This Machine ”. 3 A Press the {Adjust/Program Color} } key.
0827JupiterC1_Copy_EN_F1_FM.book Page 89 Thursday, September 4, 2003 5:06 PM Color Balance Changing the registered settings Copying with the registered settings A Press A Press the {Adjust/Program Color} } key. B Make sure that [Color Balance] is selected, and then press [Program Color Balance]. the {Adjust/Program Color} } key. B Make sure that [Color Balance] is selected, and then press [Program Color Balance].
0827JupiterC1_Copy_EN_F1_FM.book Page 90 Thursday, September 4, 2003 5:06 PM Color Adjustment/Program Image Adjustment Reference For types and examples of the image adjustment functions, see p.iii “What You Can Do with This Machine ”. You can make the following types of image adjustments. 3 ❖ Sharp / Soft Adjusts the outline of an image. ❖ Contrast Adjusts the shades of an image. ❖ Background Density Adjusts the background density of an image. ❖ Adjust U.C.R.
0827JupiterC1_Copy_EN_F1_FM.book Page 91 Thursday, September 4, 2003 5:06 PM Image Adjustment Adjusting the background density A Adjust by pressing [Lighter] or [Darker]. Note ❒ Adjust to a lighter density when copying dark textured originals, such as newspaper or recycled paper. ❒ Adjust to a darker density when darkening the color of markers or highlighters. However, highlighter pen colors are difficult to reproduce.
0827JupiterC1_Copy_EN_F1_FM.book Page 92 Thursday, September 4, 2003 5:06 PM Color Adjustment/Program User Color You can register colors created by adjusting the density of yellow, magenta, cyan, and black. You can also name the colors that you register, and print out registered colors. Reference For types and examples of the image adjustment functions, see p.iii “What You Can Do with This Machine ”.
0827JupiterC1_Copy_EN_F1_FM.book Page 93 Thursday, September 4, 2003 5:06 PM User Color D Select the color to be used as a base from [Basic Color]. The density of each color for the selected color is displayed. Note ❒ Press [Custom Setting] to directly specify the density of each color with the number keys. See p.94 “Mixing Colors Manually with the Number Keys” Selecting from user colors A Press [User Color]. B Select from the registered colors. E Specify the color density.
0827JupiterC1_Copy_EN_F1_FM.book Page 94 Thursday, September 4, 2003 5:06 PM Color Adjustment/Program Mixing Colors Manually with the Number Keys A Press the {Adjust/Program Color} } key. B Press [User Color]. C Select the number (1–15) that you want to store the user color in. 3 Note ❒ The settings of the user color will change when selecting the number already displayed by the color name. D Press [Custom Setting].
0827JupiterC1_Copy_EN_F1_FM.book Page 95 Thursday, September 4, 2003 5:06 PM 4. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Is Displayed The following chart contains explanations of common messages. If other messages are displayed, then follow the instructions as displayed. Note ❒ For messages not listed here, see “Troubleshooting” General Settings Guide. Message Causes Solutions Cannot detect original size. An irregular original is placed. See p.
0827JupiterC1_Copy_EN_F1_FM.book Page 96 Thursday, September 4, 2003 5:06 PM Troubleshooting Message Causes Solutions Cannot staple paper of this size. The Staple function cannot be used with the paper size selected. Select a paper size that can be used with the Staple function. See p.132 “Staple”. Duplex is not available with this paper size. A paper size not available when using the Duplex function has been selected. Select a proper paper size. See p.135 “Duplex”. Maximum number of sets is *.
0827JupiterC1_Copy_EN_F1_FM.book Page 97 Thursday, September 4, 2003 5:06 PM If You Cannot Make Clear Copies If You Cannot Make Clear Copies Problem Causes Solutions Copies appear dirty. The image density is too dark. Adjust the image density. See p.33 “Adjusting Copy Image Density”. Auto Image Density is not selected. Select Auto Image Density. See p.33 “Adjusting Copy Image Density”. The reverse side of an orig- The image density is too inal image is copied. dark.
0827JupiterC1_Copy_EN_F1_FM.book Page 98 Thursday, September 4, 2003 5:06 PM Troubleshooting If You Cannot Make Copies As You Want This section explains causes of, and remedies for, unexpected copy results. ❖ Basic Problem Causes Solutions Copies are not stapled. There are jammed staples in the stapler. Remove jammed staples. See “Removing Jammed Staples”General Settings Guide. Note ❒ After removing jammed staples, staples might not eject the first few times you try to use the stapler.
0827JupiterC1_Copy_EN_F1_FM.book Page 99 Thursday, September 4, 2003 5:06 PM If You Cannot Make Copies As You Want ❖ Edit Problem Causes When using the Double Copies function, parts of the original image are not copied. The original and copy pa- Select A3L for A4 K originals and per combination is not cor- A4 for A5 originals. See p.64 “Dourect. ble Copies”. When using the Border, You set a wide erased marCenter, or Center/Border gin. function, parts of the original image are not copied.
0827JupiterC1_Copy_EN_F1_FM.book Page 100 Thursday, September 4, 2003 5:06 PM Troubleshooting ❖ Combine Problem Causes Solutions You cannot fold copies into a book using the Magazine function. Combine Original Magazine Format is not set correctly. Change the setting. When using the Combine function, parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of originals and copy paper.
0827JupiterC1_Copy_EN_F1_FM.book Page 101 Thursday, September 4, 2003 5:06 PM If You Cannot Make Copies As You Want When Memory Is Full Note ❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.124 “Memory Full Auto Scan Restart” ) to [Yes], even if memory becomes full, the memory overflow message will not be displayed. The machine will make copies of scanned originals first, then automatically scan and copy remaining originals.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 103 Thursday, September 4, 2003 5:06 PM 5. User Tools (Copier/Document Server Features) User Tools Menu (Copier/Document Server Features) User Tools Item Names Default Settings 1 General Features 1/5 See p.112 “General Features /5”.
0827JupiterC1_Copy_EN_F1_FM.book Page 104 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) User Tools Item Names Default Settings General Features 4/5 See p.115 “General Features 4/5”. Document Server Storage Key:F1~F5 • F1: 2 Sided Original Top to top • F2: 1 Sided→1 Sided Combine • F3: 1 Sided→1 Sided Combine: 4 originals • F4: 1 Sided→1 Sided Combine: 8 originals • F5: Create Margin General Features 5/5 See p.115 “General Features 5/5”.
0827JupiterC1_Copy_EN_F1_FM.book Page 105 Thursday, September 4, 2003 5:06 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Default Settings Reproduction Ratio 2/2 See p.116 “Reproduction Ratio 2/2”.
0827JupiterC1_Copy_EN_F1_FM.book Page 106 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) User Tools Item Names Default Settings Edit 2/2 See p.118 “Edit 2/2”. Front Cover Copy in Combine Combine Copy Order in Combine From left to right Image Repeat Separation Line None Double Copies Separation Line None Separation Line in Combine None Orientation: Magazine Open to left Stamp See p.121 “Stamp”.
0827JupiterC1_Copy_EN_F1_FM.book Page 107 Thursday, September 4, 2003 5:06 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Date Stamp Default Settings Format Metric version: DD/MM/YYYY Inch version: MM/DD/YYYY Font Stamp Position Font 1 Metric version • Position: Top left • Top Margin: 8mm • Right Margin: 32mm Inch version • Position: Top left • Top Margin: 0.3" • Right Margin: 0.
0827JupiterC1_Copy_EN_F1_FM.book Page 108 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) User Tools Item Names Page Numbering Default Settings Stamp Format P1, P2... Font Font 1 Size Auto Duplex Back Page Stamping Position Opposite position Page Numbering in Combine Per original Stamp Position: Metric version • Position P1, 1/5, P.1, 1: Top right -1-, 1-1: Bottom center • Top/Bottom Margin P1, 1/5, P.1, 1: 12mm -1-, 1-1: 8mm • Left/Right Margin P1, 1/5, P.
0827JupiterC1_Copy_EN_F1_FM.book Page 109 Thursday, September 4, 2003 5:06 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Default Settings Adjust Color Image See p.125 “Adjust Color Image”. Background Density of ADS (Full Color / Two-color) Center of the 5 level adjustment Color Sensitivity Center of the 5 level adjustment A.C.S. Sensitivity Center of the 5 level adjustment A.C.S.
0827JupiterC1_Copy_EN_F1_FM.book Page 110 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) Accessing User Tools (Copier/Document Server Features) This section is for key operators in charge of this machine. With User Tools can change the machine's default settings. Note ❒ Be sure to exit User Tools and return to the initial copy display after all settings are finished. This section describes system settings you can set for the copier function.
0827JupiterC1_Copy_EN_F1_FM.book Page 111 Thursday, September 4, 2003 5:06 PM Accessing User Tools (Copier/Document Server Features) Exiting User Tools A After changing default settings, press [Exit] on the User Tools main menu. Changes to User Tools are complete, and the machine is ready to copy. 5 Note ❒ You can also exit User Tools by } pressing the {User Tools/Counter} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 112 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) Settings You Can Change with User Tools General Features 1/5 ❖ Auto Paper Select Priority Auto Paper Select is the default setting. You can cancel this setting. See p.35 “Selecting Copy Paper”. Note ❒ Default: ON ❖ Original Type Display You can have the original types shown on the initial display. Note ❒ Default: Display ❒ If you select [Hide], the display is as below.
0827JupiterC1_Copy_EN_F1_FM.book Page 113 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools ❖ Auto Tray Switching If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected.) This function is called “Auto Tray Switching”. This setting specifies whether to use Auto Tray Switching or not.
0827JupiterC1_Copy_EN_F1_FM.book Page 114 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) ❖ Tone: Original remains The beeper (key tone) sounds if you forget to remove originals after copying. Note ❒ Default: ON ❒ If Panel Tone in User Tools (System Settings) is [OFF], the beeper does not sound, whatever the Tone: Original remains setting. See “Panel Tone” in “General Features”, General Settings Guide.
0827JupiterC1_Copy_EN_F1_FM.book Page 115 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools General Features 4/5 General Features 5/5 ❖ Document Server Storage Key: F1–F5 You can assign frequently used functions to function keys F1 to F5. You can also change assigned functions. ❖ Clear Bypass Mode You can set whether to “Clear” or “Do not Clear” bypass tray settings when the machine is turned on, reset, or modes are cleared.
0827JupiterC1_Copy_EN_F1_FM.book Page 116 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) Reproduction Ratio 1/2 ❖ Shortcut R/E You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also change registered Reduce/Enlarge ratios.
0827JupiterC1_Copy_EN_F1_FM.book Page 117 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools ❖ Priority Setting: Reduce You can set the ratio with priority when [Reduce/Enlarge] is pressed, followed by [Reduce]. Note ❒ Default: • Metric version: 71% • Inch version: 73% ❖ Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.
0827JupiterC1_Copy_EN_F1_FM.book Page 118 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) ❖ 1 Sided→ →2 Sided Auto Margin: TtoT When using the 1 sided → 2 sided Duplex function, you can specify margins on the back side. The margin is set to the same value as “Back Margin: Left/Right”. Note ❒ Default: • Metric version: Right 5 mm • Inch version: Right 0.
0827JupiterC1_Copy_EN_F1_FM.book Page 119 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools ❖ Copy Order in Combine You can set the copy order when using the Combine function to Left to Right or Top to Bottom. GCAH090E Note ❒ Default: From left to right ❖ Image Repeat Separation Line You can select a separation line and color using the Image Repeat function from: None, Solid, Broken A, Broken B, or Crop Marks.
0827JupiterC1_Copy_EN_F1_FM.book Page 120 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) Note ❒ Default: None ❒ Line color (Full Color): Yellow, Red, Cyan, Magenta, Green, Blue, Black ❒ Separation lines cannot be specified when using [None].
0827JupiterC1_Copy_EN_F1_FM.book Page 121 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools Stamp Preset Stamp 1/4-4/4 ❖ Stamp Priority You can select the stamp type given priority when [Preset Stamp] is pressed. See p.70 “Preset Stamp”. Note ❒ Default: COPY ❖ Stamp Language You can select the language of the stamp. Note ❒ Default: English ❖ Stamp Position You can set the position where the stamp is printed. Press the arrow keys to adjust the position.
0827JupiterC1_Copy_EN_F1_FM.book Page 122 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) User Stamp 1/2-2/2 ❖ Program/Delete Stamp You can register, change, or delete these user stamp designs. Note ❒ You can register up to four custom stamps with your favorite designs. See p.73 “To program the user stamp”. Reference For how to delete the user stamp, see p.74 “To delete the user stamp”. ❖ Stamp Position 1 - 4 You can set the position where the stamp is printed.
0827JupiterC1_Copy_EN_F1_FM.book Page 123 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools ❖ Stamp Setting You can have the date printed on the first page or all pages. Note ❒ Default: All Pages ❖ Size You can set the Date Stamp size. Note ❒ Default: Auto ❖ Superimpose You can have the Date Stamp printed in white where it overlaps black parts of the image. Note ❒ Default: No ❖ Stamp Color You can set the selected priority color when printing the date.
0827JupiterC1_Copy_EN_F1_FM.book Page 124 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) Input/Output ❖ Switch to Batch (SADF) You can select to have the Batch or SADF function displayed when you press [Special Original]. See p.15 “Batch”. Note ❒ Default: Batch ❖ SADF Auto Reset In SADF mode, an original must be set within a specified time after the previous original has been fed. You can adjust this time from 3 seconds to 99 in 1 second increments.
0827JupiterC1_Copy_EN_F1_FM.book Page 125 Thursday, September 4, 2003 5:06 PM Settings You Can Change with User Tools ❖ Select Stapling Position Specify which Top 2 staples or Bottom shown on the initial display with priority. Note ❒ Default: Top 2 ❒ The 2 tray finisher or booklet finisher is required to use this function. ❖ Letterhead Setting If you select [Yes] for this function, the machine rotates images correctly.
0827JupiterC1_Copy_EN_F1_FM.book Page 126 Thursday, September 4, 2003 5:06 PM User Tools (Copier/Document Server Features) ❖ A.C.S. Priority This setting determines the copy priority between “Black & White” and “Full Color” when “Auto Color Select” is selected.
0827JupiterC1_Copy_EN_F1_FM.book Page 127 Thursday, September 4, 2003 5:06 PM 6. Specifications Combination Chart The combination chart below shows which functions can be used together. The following tables explains the symbols used in the chart. means that these functions can be used together. $ means that these functions cannot be used together. The second function selected will be the function you are working in. × means that these functions cannot be used together.
0827JupiterC1_Copy_EN_F1_FM.book Page 128 Thursday, September 4, 2003 5:06 PM Specifications Supplementary Specifications ❖ Mixed Size mode • Since small originals may not be correctly aligned with the original guide, the copy image may be slanted. • Copying speed and scanning speed will be reduced. • You can place originals of two different sizes at a time.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 131 Thursday, September 4, 2003 5:06 PM Supplementary Specifications Paper size and orientation 2 tray finisher Paper capacity and weight Finisher shift tray 1 A4KL, B5 JISKL, A5K, 81/2" × 11"KL 500 sheets (80 g/m2) (20 lb.) A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 250 sheets (80 g/m2) (20 lb.) Finisher shift tray 2 (No staple) A4K, 81/2" × 11"K 2000 sheets (80 g/m2) (20 lb.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 133 Thursday, September 4, 2003 5:06 PM Supplementary Specifications Note ❒ When stapling B4L, A3L, 81/2" × 14"L, 11" × 17"L, pull out the extender of the finisher tray. ❒ When the number of copies exceeds tray capacity, copying stops. If this happens, remove the copies from the shift tray, and then resume copying. • The tray capacity for the stapled sheets is as follows: (paper weight: 80 g/m2, 20 lb.
0827JupiterC1_Copy_EN_F1_FM.book Page 134 Thursday, September 4, 2003 5:06 PM Specifications • When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or Auto Reduce/Enlarge function, “Blank part will appear. Check orientation.”message may appear depending on the orientation of originals and paper you placed. In this case, change the paper orientation.
0827JupiterC1_Copy_EN_F1_FM.book Page 135 Thursday, September 4, 2003 5:06 PM Supplementary Specifications ❖ Duplex • You cannot use the following copy paper with this function: • Paper smaller than A5, 51/2" × 81/2" (possible on A5K, 51/2" × 81/2"K) • Paper thicker than 105 g/m2, 28 lb. • Paper thinner than 60 g/m2, 17 lb.
0827JupiterC1_Copy_EN_F1_FM.book Page 136 Thursday, September 4, 2003 5:06 PM Specifications ❖ Series Copies • The machine sets the reproduction ratio automatically to meet the paper size and copies the originals together onto the paper. • The reproduction ratios you can specify are 25–400%. • If the calculated ratio is under the minimum ratio, it is automatically adjusted to within acceptable range. However, with some ratios, parts of the image might not be copied.
0827JupiterC1_Copy_EN_F1_FM.book Page 137 Thursday, September 4, 2003 5:06 PM Supplementary Specifications ❖ Erase The width of the erased margin varies depending on the reproduction ratio.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.book Page 139 Thursday, September 4, 2003 5:06 PM INDEX 1 sided → 2 sided, 55 2 sided → 1 sided, 55 2 sided → 2 sided, 55 90° turn, 14 A Accessing user tools copier/document server features, 110 A.C.S. priority, 126 sensitivity, 125 Adjust Color Image, 125 Adjusting background density, 91 colors based on selected color, 92 contrast, 90 copy image density, 33 sharpness/softness, 90 text/photo sensitivity, 91 U.C.R.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
0827JupiterC1_Copy_EN_F1_FM.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=156 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.240000 mm Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=156 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.