Installation Sheet

ASSEMBLY INSTRUCTIONS
ITEM NO.: 1-8705-5-163
A →B →C→ D→ E→ F→ G
1. Carefully unpack and identify all parts referring to illustration for parts identification.
2. Turn the power to the installation point OFF.
3. Unravel the supply power and ground wires and pass them through the of center tube (A), (B) and
movable head(C) and canopy assembly (D).
4. Thread the bottom of center tube (A) onto the protruding nipple at top of fixture body. Repeat the
process for remaining center tube (B) and movable head(C) as shown in the diagram, until snug.
5. Put two movable head (C) through canopy assembly (D) and reinforcement (E) and tighten nuts (F)
with tools as shown.
6. Hang the crystal pendant (G) on the lamp body in order as shown in the figure.
7. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on the fixture
for maximum wattage.
8. Restore the power to the installation point ON.
9. Assembly is completely. Retain this sheet for future reference.