Owner manual

SawStop 10” Industrial Cabinet Saw 75
Push Stick Construction
This diagram illustrates a typical pushstick. Pushsticks should be constructed from material that is sturdy and electrically non-conductive such as scrap wood. Pushsticks should always be used when your hand comes within 6 inches of the blade.
Squares are 1 inch. Pushstick should be
1
/
2 inch to
3
/
4 inch thick.
1 1/2"
1/2"
Industrial Cabinet Saw Rev. 2 Ma75 75 3/9/2010 8:39:06 AM