Owner manual

SawStop 10” Industrial Cabinet Saw 89

No. Description Part No. Qty.

3HP, 1PH, 208-240V, 60Hz, TEFC Motor CB104 069

5HP, 1PH, 208-240V, 60Hz, TEFC Motor CB104 071

5HP, 3PH, 208-240V, 60Hz, TEFC Motor CB104 072

5HP, 3PH, 480V, 60Hz, TEFC Motor CB104 073

7.5HP, 3PH, 208-240V, 60Hz, TEFC Motor CB105 015

7.5HP, 3PH, 480V, 60Hz, TEFC Motor CB105 016

5HP, 3PH, 600V, 60Hz, TEFC Motor (Canada only) CB107 054

7.5HP, 3PH, 600V, 60Hz, TEFC Motor (Canada only) CB107 055

3HP, 1PH, 240V, 50Hz, TEFC Motor (Australia only) CB107 056

5HP, 3PH, 415V, 50Hz, TEFC Motor (Australia only) CB107 057

5HP, 3PH, 380V, 60Hz, TEFC Motor (Korea only) CB107 058

5HP, 3PH, 200V, 50-60Hz, TEFC Motor (Japan only) CB105 026

2 M12x1.75x110 Hex Head Bolt CB104 074 1

3 M12x1.75 Motor Positioning Bolt CB104 075 1

4 Motor Pulley CB104 076 1

5 M5x5x30 Key CB104 077 1

6 M6x1.8 Set Screws CB104 078 2

7 Tilt Lock Knob CB104 079 1

8 Front Trunnion Bracket CB104 080 1

9 Pin CB104 081 6

10 M10x1.5x55 Hex Head Limit Bolt CB104 082 3

11 M10x1.5 Nut CB104 083 4

12 Front Trunnion CB104 084 1

13 Rear Trunnion Bracket CB104 085 1

14 M10x1.5x45 Hex Head Bolt CB104 086 4

15 M10.2x18.5 Lock Washer CB104 087 13

16 M10x25x3 Washer CB104 088 8

17 Rear Trunnion CB104 089 1

18 Trunnion Brace CB104 090 1

19 M10x1.5x40 Socket Head Bolt CB104 091 9

20 Front Dust Shroud CB104 092 1

21 M6x1.0x16 Socket Head Screw CB104 093 2

22 Riving Knife CB104 094 1

23 Dust Shroud Door CB104 095 1

24 Pivot Pin CB104 096 1

25 M12 E-Clip CB104 097 2

26 Thumb Screw CB104 098 1

27 Dust Hose Coupling CB104 099 1

28 M6x1.0x15 Phillips Head Screw CB104 100 4

29 M6.3x13x2 Washer CB104 101 4

30 Bumper CB104 102 1

Internal Assembly Parts List

Industrial Cabinet Saw Rev. 2 Ma89 89 3/9/2010 8:39:08 AM