Installation guide

WAFER-945GSE 3.5” Motherboard
Page 103
BIOS Menu 5: IDE Master and IDE Slave Configuration
 Auto-Detected Drive Parameters
The “grayed-out” items in the left frame are IDE disk drive parameters automatically
detected from the firmware of the selected IDE disk drive. The drive parameters are listed
as follows:
 Device: Lists the device type (e.g. hard disk, CD-ROM etc.)
 Type: Indicates the type of devices a user can manually select
 Vendor: Lists the device manufacturer
 Size: List the storage capacity of the device.
 LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a
method of addressing data on a disk drive is supported or not.
 Block Mode: Block mode boosts IDE drive performance by increasing the
amount of data transferred. Only 512 bytes of data can be transferred per