Installation guide

WAFER-945GSE 3.5” Motherboard
Page 136
 Internal Graphics Mode Select [Enable, 8MB]
The Internal Graphic Mode Select option determines the amount of system memory that
can be used by the Internal graphics device.

Disable

Enable, 1MB
1MB of memory used by internal graphics device

Enable, 8MB DEFAULT
8MB of memory used by internal graphics device
 DVMT Mode Select [DVMT Mode]
Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology
(DVMT) operating mode.

Fixed Mode
A fixed portion of graphics memory is reserved as
graphics memory.

DVMT Mode DEFAULT
Graphics memory is dynamically allocated
according to the system and graphics needs.

Combo Mode
A fixed portion of graphics memory is reserved as
graphics memory. If more memory is needed,
graphics memory is dynamically allocated
according to the system and graphics needs.
 DVMT/FIXED Memory
Use the DVMT/FIXED Memory option to specify the maximum amount of memory that
can be allocated as graphics memory. This option can only be configured for if DVMT
Mode or Fixed Mode is selected in the DVMT Mode Select option. If Combo Mode is
selected, the maximum amount of graphics memory is 128MB. Configuration options are
listed below.
 64MB
 128MB DEFAULT