Installation guide

WAFER-945GSE 3.5” Motherboard
Page 13
2.4 Intel 945GSE Northbridge Chipset
2.4.1 Intel® 945GSE Overview
The Intel 945GSE Graphics and Memory Controller Hub (GMCH) supports the embedded
Intel® Atom™ N270 processor. The Intel 945GSE is interfaced to the processor through a
533 MHz FSB.
2.4.2 Intel® 945GSE DDR2 Controller
There is one 200-pin DDR2 SO-DIMM socket on the WAFER-945GSE. The socket
supports DDR2 SO-DIMM with the following specifications:
 Maximum Memory supported 2 GB (1 GB per rank)
 Support for DDR2 at 400 MHz and 533 MHz
 No support for Dual-Channel Interleaved mode of operation
 Enhanced Addressing support (Swap only)
The SO-DIMM socket is shown in
714HFigure 2-6 below.