Installation guide

WAFER-945GSE 3.5” Motherboard
Page 16
 Support for CRT Hot Plug
2.4.3.2 LVDS Interface
The LVDS interface is connected directly to one of the LVDS connectors on the board.
Figure 2-8: LVDS Connector
Some of the features of the LVDS interface include:
 Panel support up to UXGA (1600 x 1200)
 25-MHz to 112-MHz single-/dual-channel; @18 bpp
o TFT panel type supported
 Pixel Dithering for 18-bit TFT panel to emulate 24-bpp true color displays
 Panel Fitting. Panning, and Center Mode Supported
 CPIS 1.5 compliant
 Spread spectrum clocking supported
 Panel Power Sequencing support
 Integrated PWM interface for LCD backlight inverter control