Installation guide

WAFER-945GSE 3.5” Motherboard
Page 29
 System temperature
 CPU temperature
Eight voltage inputs on the WAFER-945GSE Super I/O Enhanced Hardware Monitor
monitor the following voltages:
 CPU Core
 +1.05V
 +3.3V
 +12V
 +1.5V
 +1.8V
 +5VSB
 VBAT
The WAFER-945GSE Super I/O Enhanced Hardware Monitor also monitors the following
fan speeds:
 CPU Fan speed
The values for the above environmental parameters are all recorded in the BIOS
Hardware Health Configuration menu.
2.7.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the WAFER-945GSE are listed
below.
 Minimum Operating Temperature: 0ºC (32°F)
 Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the northbridge and southbridge chipsets to ensure the operating
temperature of these chips remain low.