Installation guide

WAFER-945GSE 3.5” Motherboard
Page 52
The reset button connector is connected to a reset switch on the system chassis to enable
users to reboot the system when the system is turned on.
Figure 4-14: Reset Button Connector Locations
PIN NO. DESCRIPTION
1 Reset Switch
2 GND
Table 4-15: Reset Button Connector Pinouts
4.3.14 SATA Drive Connectors
CN Label:
SATA1, SATA2
CN Type:
7-pin SATA drive connectors
CN Location:
See
793H757HFigure 4-15
CN Pinouts:
See
794H758HTable 4-16
The four SATA drive connectors are each connected to a first generation SATA drive. First
generation SATA drives transfer data at speeds as high as 150Mb/s. The SATA drives can
be configured in a RAID configuration.