Installation guide

WAFER-945GSE 3.5” Motherboard
Page 65
5.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the WAFER-945GSE is installed. All
installation notices pertaining to the installation of the WAFER-945GSE
should be strictly adhered to. Failing to adhere to these precautions
may lead to severe damage of the WAFER-945GSE and injury to the
person installing the motherboard.
5.2.1 Installation Notices
WARNING:
The installation instructions described in this manual should be carefully
followed in order to prevent damage to the WAFER-945GSE,
WAFER-945GSE components and injury to the user.
Before and during the installation please DO the following:
 Read the user manual:
o The user manual provides a complete description of the WAFER-945GSE
installation instructions and configuration options.
 Wear an electrostatic discharge cuff (ESD):
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
 Place the WAFER-945GSE on an antistatic pad:
o When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
 Turn all power to the WAFER-945GSE off: