Tus neeg siv phau ntawv

Keep the equipment clean by avoiding the build-up of dust or other materials in the ventilation
grills.
Maintenance operations must be carried out by the manufacturer, the service agents, or
qualified personnel in order to avoid danger. They should not be carried out by children without
supervision.
Cleaning:
The equipment should be cleaned at least once a month. The following operations are to be
carried out:
Always keep the equipment free of ice. Use a soft cloth or soft brush to remove loose ice.
Never use sharp tools and be careful not to damage the seal. Keeping the equipment free of
ice prolongs its useful life;
Clean the outside and inside of the appliance with a dry, soft cloth or water and a neutral
detergent solution;
Clean all seals and gaskets using a damp cloth. Remove all dirt and wipe off with a dry cloth
afterwards;
Do not spill water directly into the equipment. Water spills can damage insulation materials
and electrical components;
Remove dust from the inside of the compressor compartment using only a dry brush or
vacuum cleaner;
The cooling system parts of this unit are completely sealed. They do not require any lubrication.
REVERSING THE DIRECTION OF THE DOOR
KF 611 E and KK 601 E this operation must be done in the factory.
REPLACEMENT OF LIGHTING (applicable Models)
LED lights, with power equal to 12W/m. 12V DC power supply.
This operation must be carried out by the manufacturer, authorized representatives, or qualified
personnel in order to avoid danger.