User Guide

- 15 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
Connect
ConnectConnect
Connection Suggestions
ion Suggestionsion Suggestions
ion Suggestions
If You Have Digital Cable without Cable Box or Antenna…
If You Have Digital Cable without Cable Box or Antenna… If You Have Digital Cable without Cable Box or Antenna…
If You Have Digital Cable without Cable Box or Antenna…
1. Make sure the power of X40 LCD HDTV is turned off.
2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on
the back of your X40 LCD HDTV.
3. Turn on X40 LCD HDTV.
4. Select TV (Air) for antenna or TV (Cable) for digital cable from either your remote
control’s source button or source button on the TV.
5. Use the On Screen Display to scan for channels.
Please Note :
• Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
• The X40 LCD HDTV’s tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that signal level with
your antenna or cable, your X40 LCD HDTV might lose picture or sound.
Connecting DVD Player with Component YPbPr…
Connecting DVD Player with Component YPbPr…Connecting DVD Player with Component YPbPr…
Connecting DVD Player with Component YPbPr…