Operation Manual

BASCP_EN
V03 | 08.2012
13
www.schaerer.comProduct description
We reserve the right to make technical changes.
* For special equipment, see serial plate. The values specified here apply to the basic equip-
ment.
** Special equipment, see the serial plate as of 2013.
*** The A-weighted noise level (slow) and Lpa (impulse) at the workplace of the operating per-
sonnel is below 70 dB (A) for every operating mode.
Serial plate
The serial plate is on the back of the service door.
► In the event of a technical problem or warranty claim, specify the serial number shown on
the serial plate.
Declaration of conformity
Manufacturer's address
Applied standards
The aforementioned manufacturer declares herewith that this machine complies with all rele-
vant stipulations of the specified directives. In case of any modifications of the units that have
not been approved by Schaerer, this declaration is rendered invalid. The following harmonised
standards have been applied. A quality management system certified by Bureau Veritas, in ac-
cordance with SN EN ISO 9001: 2008, has been used to ensure the proper adherence to the
requirements.
Example of a serial plate
Manufacturer Responsible for documentation
Schaerer AG
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Tel. [phone]
F [phone]
[e-mail]
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
CE conformity
Machinery Directive 2006/42/EC EMC Directive 2004/108/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A2
• EN 60335-2-75:2004 +A1 +A11 +A12
+A2
• EN 62233:2008-04
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006 +A1 +A2
• EN 61000-3-3:2008
• EN 61000-6-2:2005
• EN 61000-6-4:2007 +A1