Operation Manual

www.schaerer.com Programming
BASCP_EN
V03 | 08.2012
44
Configuration
"Mixer" menu item
Display text Description Setting range Notes
Left mixer Defines the type of powder used to fill the
powder container on the left or right.
This setting is performed by a service
technician.
This parameter affects the following other
settings:
• Beverage parameters: selection of bev-
erages in accordance with the selected
powder
• Display request to fill up the powder con-
tainer with specification of the powder
(e.g. fill up with choco powder)
None
Milk 1
Choco 1
Instant 1
Note: When the type of
powder is changed, exis-
ting beverages are not
adjusted automatically.
They continue to be
available as normal; the
powder continues to be ta-
ken from the allocated
mixer.
If the type of powder is
changed, check the exis-
ting beverage configura-
tions and, if necessary,
adjust them.
Right mixer None
Milk 2
Choco 2
Instant 2
"Hardware configuration"
Display text Description Setting range Notes
Mains supply voltage With this parameter you specify whether the
machine is a 100 V, 120 V or 230 V (default).
This is necessary in order to parameterise
the heat regulation to suit the different hot
water boilers.
This setting is performed by a service
technician.
230 V
(216..244)
100 V (95..105)
120 V
(114..126)
–
Various components Activate or deactivate different components
(e.g. after detection by AutoDetect).
This setting is performed by a service
technician.
inactive/active Note: Many components
have a direct impact on
other components. Only
use parameters if you
have the required
knowledge (expert
knowledge).
"General" menu item
Display text Description Setting range Notes
Main language Changing the display language
► Press the arrow button.
 The Options menu appears.
► Select the desired language.
All provided
languages
–
Text only beverage buttons If this setting has been activated, the bever-
age buttons will only display text and no sym-
bols.
► Push the slider to the right = On
► Push the slider to the left = Off
On/Off
–
Symbol beverage buttons Two different symbol sets are available.
► Press the arrow button.
 The Options menu appears.
► Select the desired symbol set.
Set 1
Set 2 (default)
–