Datasheet

ManualsBrandsSchaffner ManualsFiltersPower Inlet with Filter 2 A 250 VAC

DATASHEET

IEC Inlet Filters FN 280

Compact filtered power entry module

Complies with IEC/EN 60601-1

Rated currents up to 10 A

Single or dual-fuse holder

Fuses Ø5 x 20 mm

2-pole rocker switch

General purpose application

Optional earth line choke (E type)

Optional medical versions (B type)

Performance indicators

Technical specifications

Maximum continuous operating voltage

250 V, 50/60 Hz

Operating frequency

DC to 400 Hz

Rated currents

1 to 10 A @ 40°C max.

High potential test voltage

P –> PE 2000 VAC for 2 sec (standard types)

P –> PE 2500 VAC for 2 sec (B types)

P –> N 760 VAC for 2 sec

Protection category

IP 40 according to IEC 60529

Temperature range (operation and storage)

-25°C to +85°C (25/85/21)

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to

UL 94 V-2 or better

MTBF @ 40°C/230 V (Mil-HB-217F)

1,500,000 hours

Fuse holder

1 or 2 fuses (Ø5 x 20 mm)

Marking

max. 250 V ~ (text is print. below fuse symbol)

Rocker switch description

Function

2-pole, dark not illuminated

Marking I - 0

Electrical specifications

Inrush current 82 A

6,000 on-off operations according to UL 1054, TV5

10,000 on-off operations according to ENEC

Switch ratings

USA (UL) and Canada (C-UL)

10 A, 125 VAC; 10 A, 250 VAC; 1/3 HP

Europe (ENEC)

10 A (4 A), 250 VAC*

Mechanical life

50,000 cycles

* Value in () relates to the inductive current charge: cosφ = 0.65

Approvals

(CQC except HI-types)

The FN 280 power entry module combines an IEC

inlet, a mains filter with single or dual- fuse holder and

a 2-pole rocker switch in a small form factor.

Choosing FN 280 product line brings you the rapid

availability of a standard filter associated with the

necessary safety acceptances. Standard IEC

connector filters are a practical solution helping you

to pass EMI system approval in a short time. A wide

selection on amperage ratings, fuse options,

mounting possibilities and filters for medical

applications are designed to offer you the desired

solution.

Features and benefits

High conducted attenuation performance, based

on chokes with high saturation resistance and

excellent thermal behavior

Rear/front or snap-in mounting

Single or dual-fuse holder

2-pole rocker switch

Custom-specific versions are available on request

Typical applications

Portable electrical and electronic equipment

Consumer goods

EDP and office equipment

Single-phase power supplies, switch-mode power

supplies

Test and measurement equipment

Medical equipment

Typical electrical schematic

Summary of content (5 pages)

PAGE 1
DATASHEET IEC Inlet Filters FN 280 Compact filtered power entry module Complies with IEC/EN 60601-1 Approvals Rated currents up to 10 A Single or dual-fuse holder Fuses Ø5 x 20 mm 2-pole rocker switch General purpose application Optional earth line choke (E type) Optional medical versions (B type) Performance indicators (CQC except HI-types) The FN 280 power entry module combines an IEC inlet, a mains filter with single or dual- fuse holder and a 2-pole rocker switch in a small form factor.
PAGE 2
Schaffner Group EMC/EMI Products Datasheets 2018 Filter selection table Filter Rated current Leakage current** Inductance Capacitance @ 40°C (25°C) @ 230 VAC/50 Hz L1 L2 Cx Cy [mH] Resistance Output R connections Fuses** Weight [A] [μA] [mH] [nF] [nF] [kΩ] [Qty] [g] FN 281-1-06 1 (1.2) 373 7.5 220 2.2 1000 -06 1 140 FN 281-2-06 2 (2.4) 373 2 220 2.2 1000 -06 1 140 FN 281-4-06 4 (4.8) 373 1 220 2.2 1000 -06 1 140 FN 281-6-06 6 (7.2) 373 0.
PAGE 3
Schaffner Group EMC/EMI Products Filter Datasheets 2018 Rated current Leakage current** Inductance Capacitance Resistance Output @ 40°C (25°C) @ 230 VAC/50 Hz L1 L2 Cx Cy R connections [A] [μA] [mH] [mH] [nF] [nF] [kΩ] FN 284 B-1-06 1 (1.2) 2 7.5 220 1000 -06 2 90 FN 284 B-2-06 2 (2.4) 2 2 220 1000 -06 2 90 FN 284 B-4-06 4 (4.8) 2 1 220 1000 -06 2 90 FN 284 B-6-06 6 (7.2) 2 0.45 220 1000 -06 2 90 10 (11.6) 2 0.
PAGE 4
Schaffner Group EMC/EMI Products Datasheets 2018 Mechanical data FN 281/FN 282 FN 283/FN 284 FN 285/FN 286 Panel cut out Dimensions FN 281 FN 282 FN 283 FN 284 FN 285 FN 286 Tolerances A 32 32 50 50 32 32 ±0.3 B 82 82 65 65 65 65 C 72 72 40 40 D 43.1 43.1 43.1 43.1 43.6 43.6 ±0.3 E 28.5 28.5 28.5 28.5 28.5 28.5 ±0.25 F 5.5 5.5 5.5 5.5 5 5 ±0.3 G 59.95 max. 59.95 max. 59.95 max. 59.95 max. 59.95 max. 59.95 max. H Ø3.5 Ø3.5 Ø3.3 Ø3.
PAGE 5
Schaffner Group EMC/EMI Products Datasheets Headquarters, global innovation and development Sales and application centers Switzerland Schaffner Group Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 info@schaffner.com http://www.schaffner.com China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district 201201 Shanghai T +86 21 3813 9500 cschina@schaffner.com http://www.schaffner.com.