Datasheet

ManualsBrandsSchaffner ManualsFiltersPower Inlet with Filter 4 A 250 VAC

DATASHEET

IEC Inlet Filters FN 9260

General Purpose Power Entry Module with Fuses

Rated currents up to 10 A

For one or two fuses

Optional safety version (A type)

Complies with IEC/EN 60601-1

Snap-in versions (S type)

Performance indicators

Technical specifications

Maximum continuous operating voltage

250 VAC, 50/60 Hz

Operating frequency

DC to 400 Hz

Rated currents

1 to 10 A @ 40°C max.

High potential test voltage

P –> PE 2000 VAC for 2 sec (standard types)

P –> PE 2500 VAC for 2 sec (B types)

P –> N 760 VAC for 2 sec (standard types)

P –> N 1700 VDC for 2 sec (B types)

Protection category

IP 40 according to IEC 60529

Temperature range (operation and storage)

-25°C to +85°C (25/85/21)

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to

UL 94 V-2 or better

MTBF @ 40°C/230 V (Mil-HB-217F)

2,200,000 hours

Fuse holder

1 or 2 fuses (Ø5 x 20 mm)

Approvals

The FN 9260 power entry module combines an IEC

inlet, mains filter with excellent filter attenuation and

fuses in a small form factor. Choosing FN 9260

product line brings you rapid availability of a standard

filter associated with the necessary safety

acceptances. Standard IEC connector filters are a

practical solution helping you to pass EMI system

approval in a short time. A wide selection on

amperage ratings, output connections, mounting

possibilities and filters for medical applications are

designed to offer you the desired solution.

Features and Benefits

Exceptional conducted attenuation performance,

based on chokes with high saturation resistance

and excellent thermal behavior

B types comply with the requirements of IEC/EN

60601-1 for creepage and clearance, leakage current

and high potential testing

Versions up to 10 A are available with fuse holder for

one or two fuses

Custom-specific versions are available on request

Typical applications

Portable electrical and electronic equipment

Medical equipment

Small to medium-sized machines and household

equipment

Single-phase power supplies, switch-mode power

supplies

Test and measurement equipment

Typical electrical schematic

Summary of content (4 pages)

PAGE 1
DATASHEET IEC Inlet Filters FN 9260 General Purpose Power Entry Module with Fuses Rated currents up to 10 A Approvals For one or two fuses Optional safety version (A type) Complies with IEC/EN 60601-1 Snap-in versions (S type) Performance indicators The FN 9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor.
PAGE 2
Schaffner Group EMC/EMI Products Datasheets 2017 Filter selection table Capacitance Filter Rated current Leakage current* Inductance @ 40°C (25°C) @ 250 VAC/50 Hz L Cx Cy Resistance Input/Output R connections Fuses Weight (@ 120 VAC/60 Hz) [A] [mA] [mH] [μF] [nF] [kΩ] [Qty] [g] FN 9260 x-1-06-y 1 (1.2) 0.31 (0.18) 5.3 0.1 2.2 1000 -06 2 55 FN 9260 x-2-06-y 2 (2.3) 0.31 (0.18) 2.7 0.1 2.2 1000 -06 2 55 FN 9260 x-4-06-y 4 (4.6) 0.31 (0.18) 1.0 0.1 2.
PAGE 3
Schaffner Group EMC/EMI Products Datasheets 2017 Typical filter attenuation Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym FN 9260: 1 to 4 A types FN 9260: 6 and 10 A types FN 261: 1 to 4 A types FN 261: 6 and 10 A types Mechanical data FN 9260/FN 261 FN 9260 S/FN 261 S Dimensions FN 261 FN 261 S FN 9260 FN 9260 S Tolerances A 46 34 ±0.3 B 35 35 ±0.3 C 36 D 41 41 ±0.3 E 27.8 27.8 +0.3/-0 F 5.5 5.5 ±0.3 G 32 32 +0.3/-0 ±0.
PAGE 4
Schaffner Group EMC/EMI Products Datasheets Headquarters, global innovation and development Sales and application centers Switzerland Schaffner Group Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 info@schaffner.com http://www.schaffner.com China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district 201201 Shanghai T +86 21 3813 9500 cschina@schaffner.com http://www.schaffner.com.