Operation Manual

English - 62 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the 1.
channels that you subscribe to. For more information, see
“Conditional
Access” section.
Side USB input . 2.
Note: Codec update cannot be performed.
Side HDMI Input is for connecting a device that has an HDMI socket. 3.
Headphone jack is used for connecting an external headphone to the 4.
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
Video Input is used for connecting video signals of external devices.5.
Connect the video cable between the VIDEO IN socket on the TV and the
VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. 6.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to
the TV via the VIDEO INPUT, you should also connect your device with an
audio cable to the AUDIO INPUTS of the TV to enable audio.
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial / Cable Connection
• Connect the aerial or cable TV plug to the AERIAL / CABLE socket located at the rear of the TV.
Aerial or Cable
02_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 6202_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 62 27.05.2010 14:38:0827.05.2010 14:38:08