Operation Manual

English - 65 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players
may have different connectors. Please refer to your DVD player’s instruction book for additional information.
Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as
illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When the connection is
made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown below.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
inputs
Scart sockets
Component
video
inputs
Component
audio
inputs
DVD Player
REAR VIEW
02_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 6502_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 65 27.05.2010 14:38:1227.05.2010 14:38:12