Operation Manual

English - 88 -
Store
Press “
” or “ ” button to select Store. Press “ ”
or OK button to store the settings. “ Stored... ” will be
displayed on the screen.
Feature Menu
Movie Sense
Press “
” or “ ” button to select Movie Sense.
Use “
” or “ ” to set Movie Sense Low, Med, High or
Off. While Movie Sense is active, it will optimize the
TV’s video settings for motional images to acquire a
better quality and readibility.
When Movie Sense option is set to Low, Med or High,
Movie Sense demo option will be available. If one of
these options is selected and if you press OK button,
then the demo mode starts. While demo mode is
active, the screen will be divided into two sections,
one displaying the movie sense activity, the other
displaying the normal settings for TV screen.
Notes.
- Movie Sense feature supports SD signals (480i,
576i,480p,576p). It does not support HD signals
(1080p, 1080i, 720p).
- Movie Sense works while watching 24-frame
broadcasts.
- Movie Sense feature will not be available while
Game Mode is set as On. If you switch to any other
source and set Movie Sense as on, Game Mode will
automatically set as Off.
Pip-Pap
In the Feature menu, highlight PIP item by pressing
“
” or “ ” buttons. Press “ ” button to enter PIP
submenu:
Using “
” or “ ” button, you can switch to PIP, PAP
mode or turn off the feature.
If the TV is switched to PIP or PAP mode, Pip-Pap
submenu will change accordingly and the following
settings will appear on the same menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use “
” or “ ”
buttons to switch the TV to Pip , Pap or Off .
Pip Size
Using this setting, you can set the size of the Pip
window. Press “
” or “ ” button to highlight Pip
Size item. Use “
” or “ ” button to set Pip Size to
Small or Large.
Note : This setting will be inactive if the TV is set to
Pap mode.
PIP Position
This setting is used for moving the sub picture.
Select PIP Position item by using “
” or
“ ” button. Use “ ” or “ ” button to adjust PIP
position.
Positions available are: Bottom Right,Bottom Left, Top
Left and Top Right.
Source
PIP Source setting enables you to select the source
of the sub picture.
Select PIP Source item by using “
” or “ ” button.
Use “ ” or “ ” button to set PIP source.
Program
This setting will be unavailable to be used.
02_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 8802_[GB]_SSM_MB35_32884W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068949.indd 88 27.05.2010 14:38:2427.05.2010 14:38:24