Warranty

Price Book 3
|
Effective April 4, 2106
|
800.847.1864
Warranties-4
Warranties
climate or sea air which, in a short time, may have a
damaging effect on metal nishes. The longevity and
preservation of the nish appearance is determined
by base metal and nishing process. Clear protective
coating or other organic nishing applications may
require different methods of cleaning and care. As
an example, non-clear coated nishes should not be
cleaned with soaps or any solvents; organically coated
surfaces should periodically be cleaned with a mild,
nonabrasive soap and buffed lightly with a clean cloth.
The type of base metal and nishing techniques must
be considered when applying any cleaning or preser-
vative method. Contact the Schlage Technical Services
Department for further information on the care of
nished hardware.
In some instances, for customer convenience, the most
appropriate BHMA nish symbols are used to indicate
similarity of appearance, regardless of base metal of
nishing process. A, AL, D, ND, F, FA, H, S, S200-Series
and Dexter by Schlage levers are zinc-based material
and are plated to match nishes indicated. Finishes of
latches, strikes, cylinders/cores, and visible mounting
screws, though similar in appearance, may differ from
the nish of the trim. Finish numbers in the 600-Series
are the BHMA (Builders Hardware Manufacturers
Association) industry standard.
Finish Codes and Descriptions:
The nearest old U.S. equivalent code designations are
shown in parenthesis ( ).
Code Description
505 Bright Brass
605 (3) BRIGHT BRASS, Clear Coated
608 Satin Brass
609 (5) ANTIQUE BRASS, Satin Brass,
Blackened, Satin Relieved, Clear Coated
613* (10B) OIL RUBBED BRONZE, Oxidized Satin
Bronze, Oil Rubbed, No Coating
618 Polished Nickel
619 (15) SATIN NICKEL, Satin Nickel Plated,
Clear Coated
620 (15A) ANTIQUE PEWTER, Satin Nickel Plated,
Blackened, Satin Relieved, Clear Coated
621 Distressed Nickel, Clear Coated
622 MATTE BLACK, Coated
625 (26) BRIGHT CHROMIUM PLATED, No
Coating
626 (26D) SATIN CHROMIUM PLATED, No
Coating
630 (32D) SATIN STAINLESS STEEL, No Coating
716 AGED BRONZE, Clear Coated
* Oil rubbed bronze (613) is considered a category “B”
nish by ANSI/BHMA and will vary in color when applied to
different alloys and forms of base material. 613 will also vary
from production lot and additionally from one manufacturer
to another. Oil rubbed bronze will wear off over time due to
the “rubbed” nishing method that has no protective coating
or plating.
Dexter J Series Grade 3 nishes have durable, top
quality nishes obtained by the careful processing of
solid brass, stainless steel or other materials. Where
required, a protective clear coating is applied and
cured under high temperature. It is important that
climatic conditions and usage be taken under consid-
eration when selecting nishes. This is especially true
in areas subjected to strong corrosive vapors, humid
climate or sea air which, in a short time, may have a
damaging effect on metal nishes. The longevity and
preservation of the nish appearance is determined
by base metal and nishing process. Clear protective
coating or other organic nishing applications may
require different methods of cleaning and care. As
an example, non-clear coated nishes should not be
cleaned with soaps or any solvents; organically coated
surfaces should periodically be cleaned with a mild,
non-abrasive soap and buffed lightly with a clean cloth.
The type of base metal and nishing techniques must
be considered when applying any cleaning or preser-
vative method. Contact the Schlage Technical Service
Department for further information on the care of
nished hardware.
In some instances, for customer convenience, the
most appropriate Builders Hardware Manufacturers
Association (BHMA) nish symbols are used to indicate
similarity of appearance, regardless of base metal
of nishing process. J-Series levers are zinc-based
material and are plated to match nishes indicated.
Finish numbers in the 600-Series are the BHMA industry
standard. The nearest old U.S. equivalent code desig-
nations are shown in parentheses.
Refer to each lock series section for standard nish
availability.
Finish Codes and Descriptions:
Code Description
605 (US3) BRIGHT BRASS, Clear Coated
608 Satin Brass
609 (US5) ANTIQUE BRASS, Satin Brass,
Blackened, Satin Relieved, Clear Coated
618 Polished Nickel
619 (US15) SATIN NICKEL, Clear Coated
620 (US15A) ANTIQUE PEWTER, Clear Coated
625 (US26) BRIGHT CHROME, Clear Coated
626 (US26D) SATIN CHROME, No Coating
630 (US32D) SATIN STAINLESS STEEL, No Coating
716 Aged Bronze, Clear Coated