WA L L AN D COUNT E R T OP PR O F I L E S INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE FINISHING AND EDGE PROTECTION 2.3 Schluter®-JOLLY 2.12 Schluter®-INDEC ® 90° 2.5 ED Schluter -RONDEC-DB =H 11,5 2.3 Schluter -JOLLY-P 16.2 Schluter -DESIGNBASE-SL 2.10 Schluter®-QUADEC 2.17 Schluter®-FINEC/-SQ 2.2 Schluter®-DESIGNLINE 2.1 Schluter®-RONDEC 2.6 Schluter®-ECK-E 2.8 Schluter®-RONDEC-STEP 2.7 Schluter®-ECK-K 2.9 Schluter®-RONDEC-CT ® ® 2.11 Schluter®-QUADEC-FS 2 mm - 3/32" 135° 3.
WAL L AN D C O U N T ERTOP PR OFILE S Application and Function Wall Profiles 2.3 Schluter®-JOLLY is a finishing and edgeprotection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and a 90° vertical wall section that provides a decorative finish and protects adjacent tiles.
WAL L AN D C O U N T ERTOP PR OFILE S DECO-SGC is available in anodized aluminum, and features a trapezoid perforated anchoring leg that is secured in the bond coat beneath the tile. the floor-to-wall transition from moisture and to reduce the transmission of impact sound. Note: Inside and outside corners, connectors and end caps are available. ECK-E 2.17 Schluter -FINEC is a finishing and edge 2 mm - 3/32" profile for the outside 3.5 mm - 1/8" protection corners of tile coverings or mosaics.
WAL L AN D C O U N T ERTOP PR OFILE S SCHIENE-STEP is available in anodized aluminum and brushed stainless steel versions, which have different shapes and intended uses. The stainless steel version is available in three vertical leg lengths: 1-1/2" (39 mm) for countertops, 1-3/16" (30 mm) for stairs, and 7/16" (11 mm) for tile over tile applications. Matching inside and outside corners and connectors are available, depending on the vertical leg length.
WAL L AN D C O U N T ERTOP PR OFILE S anchoring leg must be cut off by a minimum dimension x, depending on the profile length, including the visible area has to be chamfered at a 45° angle; see the E illustration below. similar before installation. Stainless steel profiles may be cut using any of the following options: • Variable-speed angle grinder set to the lowest speed using the Schluter®-PROCUT-TSM cutting wheel. • Band saw with a metal cutting blade.
WAL L AN D C O U N T ERTOP PR OFILE S and end caps using a permanently elastic, waterproof adhesive (e.g. KERDI-FIX or silicone). Prior to application, any contactinhibiting substances (e.g. grease, etc.) must be removed. 4. Use a suitable cleaning agent to remove any excess adhesive from around the profile. Remove the protective foil. Note: The optional sealing lip is inserted into the profile prior to installation.
WAL L AN D C O U N T ERTOP PR OFILE S Product Item Numbers Stainless Steel Schluter®-JOLLY Stainless steel H = 1/4" (6 mm) H = 5/16" - 1/2" (8 - 12.5 mm) Length = 2.5 m - 8' 2-1/2" 6 8 10 11 12.5 Brushed stainless steel 304 (1.4301 = V2A) (EB) H= mm - in. Profile Outside corner - 1/4 - 5/16 - 3/8 - 7/16 - 1/2 J 60 EB J 80 EB J 100 EB J 110 EB J 125 EB EV / J 60 EB EV / J 80 EB EV / J 100 EB EV / J 110 EB EV / J 125 EB Brass For sizes 1/4" - 7/16" (6 - 11 mm) Outside corner For size 1/2" (12.
WAL L AN D C O U N T ERTOP PR OFILE S Anodized Aluminum Schluter®-JOLLY Length = 2.5 m - 8' 2-1/2" Anodized aluminum R = Radius Notes: • Radius available for JOLLY in metal profiles only. • JOLLY in polished aluminum and chrome-plated brass require a relatively large bending radius. H= mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 Length = 2.5 m - 8' 2-1/2" H= mm - in. 6 - 1/4 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 Length = 2.5 m - 8' 2-1/2" H= mm - in. 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-JOLLY Length = 2.5 m - 8' 2-1/2" H= mm - in. 6 8 10 11 12.5 - 1/4 - 5/16 - 3/8 - 7/16 - 1/2 Length = 2.5 m - 8' 2-1/2" H= mm - in. 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-TRENDLINE Textured Color-coated Aluminum Schluter®-JOLLY *Color Codes Length = 2.5 m - 8' 2-1/2" Textured color-coated aluminum (TS) H= mm - in. 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-JOLLY-P H = 1/8"- 3/16" (3 - 4.5 mm) 1/8" - 3 mm Length = 2.5 m - 8' 2-1/2" PVC H= mm - in. Item No. 4.5 6 8 10 11 12.5 - 3/16 - 1/4 - 5/16 - 3/8 - 7/16 - 1/2 H = 1/4" - 1/2" (6 - 12.5 mm) 11 color* + color* + color* + color* + color* + color* + 45 60 80 100 110 125 10-foot (3.05 m) JOLLY-P Profiles – PVC Length = 3.05 m - 10' Bright white (BW) H= mm - in. Item No. 8 - 5/16 10 - 3/8 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Stainless steel 304 (1.4301 = V2A) (E) H= mm - in. Stainless steel =H 4.5 6 7 8 9 10 11 12.5 15 Profile - 3/16 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 9/16 RO RO RO RO RO RO RO RO RO 45 E 60 E 70 E 80 E 90 E 100 E 110 E 125 E 150 E EV/RO EV/RO EV/RO EV/RO EV/RO EV/RO EV/RO EV/RO EV/RO Length = 2.5 m - 8' 2-1/2" Brushed stainless steel 304 (1.4301 = V2A) (EB) H= mm - in. End cap 6 8 10 12.
WAL L AN D C O U N T ERTOP PR OFILE S Brass Brass Schluter®-RONDEC =H Length = 2.5 m - 8' 2-1/2" Chrome-plated solid brass (MC) H= mm - in. Profile 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 RO RO RO RO Aluminum with polished chrome finish Outside corner, 90º * 60 MC 80 MC 100 MC 125 MC EV/RO EV/RO EV/RO EV/RO Inside corner, 90º 60 ACG 80 ACG 100 ACG 125 ACG IV/RO IV/RO IV/RO IV/RO 60 ACG 80 ACG 100 ACG 125 ACG Inside Corner Outside Corner Anodized Aluminum Schluter®-RONDEC Length = 2.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Satin nickel anod. alu. (AT) H= mm - in. 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 H= mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Profile RO RO RO RO 60 AT 80 AT 100 AT 125 AT Outside corner, 90º EV/RO EV/RO EV/RO EV/RO Double-leg outside corner, 90º Double-leg inside corner, 90º E2L/RO 80 AT E2L/RO 100 AT E2L/RO 125 AT I2L/RO 80 AT I2L/RO 100 AT I2L/RO 125 AT Length = 2.5 m - 8' 2-1/2" - 1/4 - 5/16 - 3/8 - 1/2 H= mm - in.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Polished copper anod. alu. (AKG) H= mm - in. 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 H= mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Profile RO RO RO RO 60 AKG 80 AKG 100 AKG 125 AKG H= mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 E2L/RO 80 AKG E2L/RO 100 AKG E2L/RO 125 AKG I2L/RO 80 AKG I2L/RO 100 AKG I2L/RO 125 AKG Profile RO RO RO RO 60 AKGB 80 AKGB 100 AKGB 125 AKGB H= mm - in. 8 - 5/16 10 - 3/8 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Polished brass anod. alu. (AMG) H= mm - in. 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 H= mm - in. 8 - 5/16 10 - 3/8 12.5 - 1/2 Profile RO RO RO RO 60 AMG 80 AMG 100 AMG 125 AMG Outside corner, 90º EV/RO EV/RO EV/RO EV/RO Double-leg outside corner, 90º Double-leg inside corner, 90º E2L/RO 80 AMG E2L/RO 100 AMG E2L/RO 125 AMG I2L/RO 80 AMG I2L/RO 100 AMG I2L/RO 125 AMG Length = 2.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Brushed black anod. alu. (AGSB) H= mm - in. 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 Profile RO RO RO RO 60 AGSB 80 AGSB 100 AGSB 125 AGSB Outside corner, 90º EV/RO EV/RO EV/RO EV/RO 60 AGSB 80 AGSB 100 AGSB 125 AGSB H= mm - in. Double-leg outside corner, 90º Double-leg inside corner, 90º 8 - 5/16 10 - 3/8 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-TRENDLINE Textured Color-coated Aluminum Textured Color-coated Aluminum Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" =H Textured color-coated aluminum (TS) H= mm - in. 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Color-coated Aluminum Schluter®-RONDEC Length = 2.5 m - 8' 2-1/2" Color-coated Aluminum =H Color-coated aluminum (AC) H= mm - in. 6 8 10 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-QUADEC Length = 2.5 m - 8' 2-1/2" H= mm - in. Stainless steel =H 4.5 6 7 8 9 10 11 12.5 14 15 - 3/16 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 17/32 - 9/16 Length = 2.5 m - 8' 2-1/2" H= mm - in. 6 7 8 9 10 11 12.5 14 15 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 17/32 - 9/16 Inside Corner Outside Corner Stainless steel 304 (1.
WAL L AN D C O U N T ERTOP PR OFILE S 10-foot (3.05 m) QUADEC Profiles – Anodized Aluminum Length = 3.05 m - 10' Polished chrome anodized aluminum (ACG) H= mm - in. Profile 8 - 5/16 10 - 3/8 12.5 - 1/2 Q 80 ACG / 300 Q 100 ACG / 300 Q 125 ACG / 300 Schluter®-TRENDLINE Textured Color-coated Aluminum Schluter®-QUADEC Length = 2.5 m - 8' 2-1/2" Textured color-coated aluminum (TS) H= mm - in. Aluminum =H 4.5 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Color-coated Aluminum Aluminum Schluter®-QUADEC =H *Color Codes Length = 2.5 m - 8' 2-1/2" Color-coated aluminum (AC) H= mm - in. 4.5 6 8 10 11 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-FINEC 2 mm - 3/32" Length = 2.5 m - 8' 2-1/2" Stainless steel 304 (1.4301 = V2A) (E) Satin anodized aluminum (AE) H= mm - in. Item No. Item No. - 3/32 - 3/16 - 9/32 - 11/32 - 7/16 - 1/2 F F F F F 2.5 4.5 7 135° 9 11 12.5 3.5 mm - 1/8" 135° Stainless steel 3.5 mm - 1/8" 135° 45 E 70 E 90 E 110 E 125 E F F F F F F Length = 2.5 m - 8' 2-1/2" Textured color-coated aluminum H= mm - in. Item No.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC-DB Length = 2.5 m - 8' 2-1/2" H= mm - in. =H 14 - 17/32 Satin anodized aluminum (AE) Outside corner, Profile 90° DB 14 AE Satin copper anod. alu. (AK) Satin brass anod. alu. (AM) Profile Profile DB 14 AK DB 14 AM EV/DB 14 AE 10-foot (3.05 m) RONDEC-DB Profile 5/16" 7/32" 8 mm 5 mm Length = 3.05 m - 10' Satin anodized aluminum (AE) H= mm - in. Profile 14 - 17/32 DB 14 AE / 300 Schluter®-DESIGNLINE Aluminum Length = 2.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-DESIGNBASE-SL Length = 2.5 m - 8' 2-1/2" Aluminum =H H= mm - in. Profile Outside corner, 90º Inside corner, 90º 60 - 2-3/8 80 - 3-1/8 DB SL 60 AE DB SL 80 AE ED / DB SL 60 AE ED / DB SL 80 AE ID / DB SL 60 AE ID / DB SL 80 AE H= mm - in. End cap (left) End cap (right) Connector EL / DB SL 60 AE EL / DB SL 80 AE ER / DB SL 60 AE ER / DB SL 80 AE V / DB SL 60 AE V / DB SL 80 AE 60 - 2-3/8 80 - 3-1/8 11.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-DESIGNBASE-SL-E Brushed stainless steel 304 (1.4301 = V2A) (EB) Length = 2.5 m - 8' 2-1/2" H= mm - in. Stainless steel 110 - 4-3/8 160 - 6-3/8 H= mm - in.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-DECO-DE Stainless steel 304 (1.4301 = V2A) (E) Length = 2.5 m - 8' 2-1/2" H = mm - in. 8 10 11 12.5 =H =H - 5/16 - 3/8 - 7/16 - 1/2 Brushed stainless steel 304 (1.4301 = V2A) (EB) Item No. Item No. DE 80 ES DE 100 ES DE 110 ES DE 125 ES DE 80 EBS DE 100 EBS DE 110 EBS DE 125 EBS Schluter®-DECO-SG =W Aluminum =H Brushed stainless steel 304 (1.4301 = V2A) (EB) Satin anodized aluminum (AE) Bright chrome anodized aluminum (ACB) H= mm - in.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-ECK-E H= mm - in. 37 37 mm - 1-15/32" mm - 1-1 5/3 2" r = 8 mm 5/16" Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) Item No. Item No. E37 V2A 60/150 E37 V2A 80/150 E37 V2A 110/150 E37 V2A EB 60/150 E37 V2A EB 80/150 E37 V2A EB 110/150 90º Angle Length = 1.50 m - 4' 11" =H 90º =H 135º 6 - 1/4 8 - 5/16 11 - 7/16 Length = 2.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-ECK-KI W= mm - in. Stainless steel 304 (1.4301 = V2A) (E) Brushed stainless steel 304 (1.4301 = V2A) (EB) Item No. Item No. KI15 E/150 KI15 EB/150 KI15 E/200 KI15 EB/200 KI15 E KI15 EB KI15 E/300 KI15 EB/300 W = 9/16" - 15 mm Length = 1.50 m - 4' 11" r = 1/32" 1 mm 15 - 9/16 Length = 2.00 m - 6' 7" 15 - 9/16 Length = 2.5 m - 8' 2-1/2" 15 - 9/16 Length = 3.00 m - 9' 10" 15 - 9/16 Schluter®-ECK-KHK Stainless steel 304 (1.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC-STEP Length = 2.5 m - 8' 2-1/2" =H A = 1-1/2" - 39 mm or 2-1/4" - 57 mm H= mm - in. A: 39 mm - 1-1/2" 8 - 5/16 10 - 3/8 12.5 - 1/2 A: 57 mm - 2-1/4" 8 - 5/16 10 - 3/8 12.
WAL L AN D C O U N T ERTOP PR OFILE S Length = 2.5 m - 8' 2-1/2" H= mm - in. A: 39 mm - 1-1/2" 8 - 5/16 RS 10 - 3/8 RS 12.5 - 1/2 RS A: 57 mm - 2-1/4" 8 - 5/16 RS 10 - 3/8 RS 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-RONDEC-CT Length = 2.5 m - 8' 2-1/2" H= mm - in. 1-1/4" - 32 mm =H =H A = 1-1/2" 39 mm 8 - 5/16 10 - 3/8 12.
WAL L AN D C O U N T ERTOP PR OFILE S Schluter®-TRENDLINE Textured Color-coated Aluminum *Color Codes Length = 2.5 m - 8' 2-1/2" Textured color-coated aluminum (TS) H= mm - in. Profile TSB TSOB TSG RC 80 + color* 39 RC 100 + color* 39 RC 125 + color* 39 Beige Bronze Pewter 8 - 5/16 10 - 3/8 12.5 - 1/2 * To complete the item number, add the color code (e.g., RC 80 TSB 39). Length = 2.5 m - 8' 2-1/2" Textured color-coated aluminum (TS) H= mm - in. 8 - 5/16 10 - 3/8 12.
Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that its Schluter®-JOLLY, Schluter®-JOLLY-P, Schluter®-DESIGNBASE-SL, Schluter®-RONDEC-DB, Schluter®-QUADEC, Schluter®-QUADEC-K, Schluter®-QUADEC-FS, Schluter®-RONDEC, Schluter®-FINEC, Schluter®-DESIGNLINE, Schluter®-DECO-DE, Schlu