User Manual

8 Freedom Xi Owner’s Guide
Freedom Inverter Configuration
Adjusting Feature Settings
The Power and Select buttons can be used to:
• change the inverter mode setting
• disable or enable the audible alarm
• change the shutdown setting
• return to factory default settings
Figure 2 Display Panel
LED
screen
Status
LED light
Info and Settings LED lights
Inverter
Power button
To cycle through the various feature settings:
1. Press and hold the Inverter Power button for five seconds to
enter the feature settings mode.
2. Press the Inverter Power button to toggle between the following
information:
Setting LED Screen
Inverter Mode Setting 
Alarm Setting 
Shutdown Setting 
Factory Setting 
To change the inverter mode setting:
By default the inverter mode is set to ON (“”).
1. Press and hold the Inverter Power button for five seconds.
2. Press the Inverter Power button until
the LED screen flashes
“” intermittently.
3. Press the Select button once.
The LED screen will display the
present (or most recent)
inverter mode setting.
 Inverter mode setting is ON with Power
Save
feature
 Inverter mode setting is ON without Power
Save
feature
 Inverter mode setting is OFF
Freedom XI Owners Guide.book Page 8 Friday, September 18, 2015 2:57 PM