Instruction manual

ConneXium Ethernet Switches: 499NMS25101, 499NSS25101, 499NMS25102, 499NSS25102
14
31006003 01 July 2004
Ground
Connection
The front panel of ConneXium switch modules is grounded via a separate ground
connection. The grounding screw is located on the front panel of the 499NMS2510x
and 499NSS2510x switches.
The Ethernet RJ-45 socket casings are electrically connected to the front panel of
the switch.
Dismantling To take the ConneXium switch module off the ISO/DIN rail, insert a screwdriver
horizontally under the housing into the locking slide, pull it downward (without tipping
the screwdriver), and lift the module upward.
Note: Make sure that the electrical installation meets local or nationally applicable
safety regulations.