Instruction manual

ConneXium Ethernet Switches: 499NMS25101, 499NSS25101, 499NMS25102, 499NSS25102

31006003 01 July 2004

Important Information

NOTICE Read these instructions carefully, and look at the equipment to become familiar with

the device before trying to install, operate, or maintain it. The following special

messages may appear throughout this documentation or on the equipment to warn

of potential hazards or to call attention to information that clarifies or simplifies a

procedure.

PLEASE NOTE Electrical equipment should be serviced only by qualified personnel. No responsi-

bility is assumed by Schneider Electric for any consequences arising out of the use

of this material. This document is not intended as an instruction manual for untrained

persons.

The addition of this symbol to a Danger or Warning safety label indicates

that an electrical hazard exists, which will result in personal injury if the

instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal

injury hazards. Obey all safety messages that follow this symbol to avoid

possible injury or death.

DANGER indicates an imminently hazardous situation, which, if not avoided, will

result in death, serious injury, or equipment damage.

DANGER

WARNING

WARNING indicates a potentially hazardous situation, which, if not avoided, can result

in death, serious injury, or equipment damage.

CAUTION

CAUTION indicates a potentially hazardous situation, which, if not avoided, can result

in injury or equipment damage.