Installation manual

Configuration Mode (ConF)
104 S1A28692 03/2010
Parameters described in this page can be accessed by:
(1) On the integrated display unit: 0 to 9,999 then 10.00 to 65.53 (10,000 to 65,536).
SIr [Boost level align.]
0 to 200% 100%
g
Current level in % of [Nominal I sync.] (nCrS) for high frequency phase-shift angle measurement SPMA type.
Code Name / Description Adjustment range Factory setting
g
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from within the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
T
Parameter that can be modified during operation or when stopped.
DRI- > CONF > FULL > DRC- > SYN-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com