Installation manual

Configuration Mode (ConF)
116 S1A28692 03/2010
Configuration of analog inputs and Pulse input
The minimum and maximum input values (in volts, mA, etc.) are converted to % in order to adapt the
references to the application.
Minimum and maximum input values:
The minimum value corresponds to a reference of 0% and the maximum value to a reference of 100%. The
minimum value may be greater than the maximum value:
For +/- bidirectional inputs, the min. and max. are relative to the absolute value, for example +/- 2 to 8 V.
Reference
100%
0%
[Min value]
(
CrLx or
ULx or PIL)
[Max value]
(CrHx or
UHx or PFr)
20 mA or
10 V or
20.00 kHz
Current or voltage
or pulse input
Reference
100%
0%
[Min value]
(
CrLx or
ULx or PIL)
[Max value]
(
CrHx or
UHx or PFr)
Current or voltage
or pulse input
20 mA or
10 V or
20.00 kHz
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com