Installation manual

Configuration Mode (ConF)
S1A28692 03/2010 119
Delinearization: For analog inputs only:
The input can be delinearized by configuring an intermediate point on the input/output curve of this input:
For range 0
V 100%
Note: For [Interm. point X], 0% corresponds to [Min value] and 100% to [Max value].
For range -100%
V 100%
Reference
100%
0%
[Min value]
(0%)
[Interm. point X] [Max value]
(100%)
Current or
voltage
input
[Interm. point Y]
20 mA or
10 V
Reference
100%
0%
[Min value]
(-100%)
[Interm. point
X]
[Max value]
(100%)
Current or
voltage input
[Interm. point Y]
- [Interm. point Y]
- 100%
- [Interm. point X]
0%
20 mA or
10 V
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com