Installation manual

Configuration Mode (ConF)
S1A28692 03/2010 135
Command channel for [Separate] (SEP) configuration
Separate reference and command
Parameters FLO and FLOC are common to reference and command.
Example: If the reference is in forced local mode via AI1 (analog input at the terminals), command in forced
local mode is via LI (logic input at the terminals).
The command channels Cd1 and Cd2 are independent of the reference channels Fr1, Fr1b and
Fr2.
Cd1, Cd2:
• Terminals, graphic display terminal, integrated Modbus, integrated CANopen®, communication card
279/
/4/2
//;
/@%
279
:;I
/@$
(Stop Key priority)
Forced local
Parameter:
The black square represents the factory
setting assignment, except for [Profile].
Forward
Reverse
STOP
Graphic display
terminal
Key:
Graphic display
terminal
LI
AI1
(RUN/STOP
FWD/REV)
LCC
nO
AI2
AI3
[Cmd channel 1]
[Cmd channel 2]
[Cmd switching]
[Profile]
YES
SEP
STOP
CMD
LI
nO
nO
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com