Installation manual

Configuration Mode (ConF)
154 S1A28692 03/2010
Parameters described in this page can be accessed by:
dA3 [Subtract. ref. 3]
[No] (nO)
Selection of a reference to be subtracted from [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Identical to [Summing ref. 2] (SA2) page 153
.
MA2 [Multiplier ref. 2]
[No] (nO)
Selection of a multiplier reference [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Identical to [Summing ref. 2] (SA2) page 153
.
MA3 [Multiplier ref. 3]
[No] (nO)
Selection of a multiplier reference [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Identical to [Summing ref. 2] (SA2) page 153
.
Code Name / Description Adjustment range Factory setting
DRI- > CONF > FULL > FUN- > OAI-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com