Installation manual

Configuration Mode (ConF)
168 S1A28692 03/2010
Parameters described in this page can be accessed by:
(1) The parameter can also be accessed in the [SETTINGS] (SEt-) menu.
JPF [Skip Frequency]
0 to 599 Hz 0 Hz
T
Skip frequency. This parameter helps to prevent prolonged operation within an adjustable range around the regulated frequency.
This function can be used to help to prevent a critical speed, which would cause resonance, being reached. Setting the function
to 0 renders it inactive.
JF2 [Skip Frequency 2]
0 to 599 Hz 0 Hz
T
2nd skip frequency. This parameter helps to prevent prolonged operation within an adjustable range around the regulated
frequency. This function can be used to help to prevent a critical speed, which would cause resonance, being reached. Setting
the function to 0 renders it inactive.
JF3 [3rd Skip Frequency]
0 to 599 Hz 0 Hz
T
3rd skip frequency. This parameter helps to prevent prolonged operation within an adjustable range around the regulated
frequency. This function can be used to help to prevent a critical speed, which would cause resonance, being reached. Setting
the function to 0 renders it inactive.
JFH [Skip.Freq.Hysteresis]
0.1 to 10 Hz 1 Hz
g
T
This parameter is visible if at least one skip frequency [Skip Frequency] (JPF), [Skip Frequency 2] (JF2) or
[3rd Skip Frequency] (JF3) is different from 0.
Skip frequency range: between (JPF – JFH) and (JPF + JFH), for example.
This adjustment is common to the 3 frequencies (JPF, JF2, JF3).
Code Name / Description Adjustment range Factory setting
g
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from within the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
T
Parameter that can be modified during operation or when stopped.
DRI- > CONF > FULL > FUN- > PSS-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com