Installation manual

Overview
S1A28692 03/2010 19
Application functions
The tables on the following pages show the combinations of functions and applications, in order to guide your
selection.
The applications in these tables relate to the following machines, in particular:
• Hoisting: cranes, overhead cranes, gantries (vertical hoisting, translation, slewing), lifting platforms
• Handling: palletizers/depalletizers, conveyors, roller tables
• Packing: carton packers, labeling machines
• Textiles: weaving looms, carding frames, washing machines, spinners, drawing frames
• Wood: automatic lathes, saws, milling
• Process
Each machine has its own special features, and the combinations listed here are neither mandatory nor
exhaustive.
Some functions are designed specifically for a particular application. In this case, the application is identified
by a tab in the margin on the relevant programming pages.
Motor control functions
Functions Page Applications
Hoisting Handling Packing Textiles Wood Process
V/f ratio 92
bb
Sensorless flux vector control 92
bbbbbb
2-point vector control 92
bb
Open-loop synchronous motor 92
b
Output frequency up to 599 Hz 92
bb
Motor overvoltage limiting 107
bb
DC bus connection (see Installation manual) -
bb
Motor fluxing using a logic input 174
bbb
Switching frequency of up to 16 kHz 82
bb
Auto-tuning 75
bbbbbb
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com