Installation manual

Configuration Mode (ConF)
S1A28692 03/2010 191
Parameters described in this page can be accessed by:
(1) In corresponds to the rated drive current indicated in the Installation manual and on the drive nameplate.
rStL [Rope slack trq level]
0 to 100% 0%
g
Adjustment threshold corresponding to a load weighing slightly less than the hook when off-load, as a % of the rated load.
This parameter can be accessed if [Rope slack trq level] (rSd) has been assigned.
Code Name / Description Adjustment range Factory setting
g
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from within the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
T
Parameter that can be modified during operation or when stopped.
DRI- > CONF > FULL > FUN- > HSH-
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com