Installation manual

Overview
24 S1A28692 03/2010
Graphic display terminal option
Description of the graphic display terminal
With the graphic display terminal, which works with FLASH V1.1IE26 or higher, it is possible to display more
detailed information than can be shown on the integrated display terminal.
Note: Keys 3, 4, 5 and 6 can be used to control the drive directly, if control via the graphic display terminal is
activated.
To activate the keys on the remote display terminal, you first have to configure
[Ref.1 channel] (Fr1) = [HMI] (LCC). For more information, see page 139
.
1 Graphic display
2 Function keys
F1, F2, F3, F4,
see page
142
3 STOP/RESET
key
4 RUN key
5 Jog dial:
• Press (ENT):
- To save the current value
- To enter the selected menu or parameter
• Turn +/-:
- To increment or decrement a value
- To go to the next or previous line
- To increase or decrease the reference if control via the graphic
display terminal is activated
7 ESC key: Aborts a value, a
parameter or a menu to return to
the previous selection
6 Key for reversing the direction
of rotation of the motor
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com