Installation manual

Overview
S1A28692 03/2010 25
Example configuration windows:
Single selection
Multiple selection
Example configuration window for one value:
The << and >> arrows (keys F2 and F3) are used to select the digit to be modified, and the jog dial is rotated
to increase or decrease this number.
Example visualization of function blocks state:
When powering up the graphic display terminal for the first time, the user has to select
the required language.
When only one selection is possible, the selection made is indicated by .
Example: Only one language can be chosen.
When multiple selection is possible, the selections made are indicated by .
Example: A number of parameters can be chosen to form the [USER MENU].
LANGUAGE
English
Français
Deutsch
Italiano
Español
Chinese
Русский
Türkçe
PARAMETER SELECTION
SETTINGS
Ramp increment
Acceleration-- - - - - - - -
Deceleration- - - - - - - - -
Acc eler atio n 2- - - - - - - - -
Deceleration 2
Edit
RDY Term +0.0 Hz 0.0 A
Acceleration
9 .51s
Min = 0.00 Max = 99.99
<< >> Quick
ENT
RDY Term +0.0 Hz 0.0 A
Acceleration
9. 5 1s
Min = 0.00 Max = 99.99
<< >> Quick
OFF light: A valid function blocks program is in the ATV32 in stop mode.
ON light: A valid function blocks program is in the ATV32 in run mode. The
drive is considered as being in running state and configuration parameters
cannot be modified.
RDY Term +0.0 Hz 0.0 A
Acceleration
9 .51s
Min = 0.00 Max = 99.99
<< >> Quick
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com