Installation manual

Interface (ItF)
S1A28692 03/2010 263
Comparison of the menus that can be accessed on the graphic display terminal/integrated display terminal
(1) Can be accessed only with graphic display terminal.
Access level
[1 DRIVE MENU] (drI-)
Standard Std
Advanced AdU
Expert EPr
[1.1 SPEED REFERENCE] (rEF-)
Basic bAS
[1.2 MONITORING] (MOn-)
MMO- (Monitoring motor)
IOM- (I/O MAP)
SAF- (Monitoring Safety)
MFb- (Monitoring Function Blocks)
CMM- (Communication Map)
MPI- (Monitoring PI)
PEt- (Monitoring Power time)
ALr- (Alarms) (1)
SSt- (Other state) (1)
COd- (Password)
[1.3 CONFIGURATION] (COnF)
MYMn- (My Menu)
FCS- (Factory Settings)
FULL (Full)
SIM- (Simply Start)
SEt- (Settings)
FbM- (Function
Blocks)
[2 IDENTIFICATION] (OId-) (1)
[3 INTERFACE] (ItF-) (1)
[3.1 ACCESS LEVEL] (LAC)
[3.2 LANGUAGE] (LnG)
[4 OPEN / SAVE AS] (trA-) (1)
[5 PASSWORD] (COd-) (1)
A single function can be assigned to each input.
[1 DRIVE MENU] (drI-) [1.2 MONITORING] (MOn-) dGt- (Diagnostics)
[1.3 CONFIGURATION] (COnF) FULL (Full)
drC- (Motor Control)
I_O- (Inputs /
Outputs Configuration)
CtL- (Command)
FUn- (Application
function)
FLt- (Fault
Management)
COM-
(Communication)
[3 INTERFACE] (ItF-)
(1)
[3.3 MONITORING CONFIG.] (MCF-)
A single function can be assigned to each input.
[3.4 DISPLAY CONFIG.] (dCF-) (1)
Several functions can be assigned to each input.
Expert parameters
Several functions can be assigned to each input.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com